Here's what your 10 as plug wires do Hope this helps

It needs prog to either old type 433 hz or new type fob 434 hz Set up is done with land rover sdd but retro fitting into an older truck to utilise new type fobs requires some additional wiring and an rf fitted I'll do a thread on it when I get the chance

Open door equals alarm means the pillar switches are workin It's a 10as fault I'd say Pop out the drivers side lower speaker and undo the 2 plugs There's 2 small torx screws holding the 10as on I'd be interested to know if wiring is ok from 10as to interior lamp and whether any rain water has...

I wasn't buying anything but it's spent hundreds for me in the last month..... Sneaky

Courtesy switch on pillars is an earth, could be corroded, pop screw and switch out and look for the greenness 10as module does regulate the interior lights control and has inputs from sed switch, if you arm the alarm and manually open the drivers door with key does the alarm trigger? The...

A very cheapo job is just the tank off a knackered compressor with gauge. Fill up at the local garage etc and hey presto a bit of air. No need for compressors etc Ok this idea is of limited appeal but if you only need a tankful as a top up then.......

Agreed I'm running td5 gauges in my 300 and ran it low to the red increment and it was all ok Readings were just the same as my Tdi gauge but with less wavering of the pointer Stick with that standard sender

Ya see, al it needed is a woman's touch ;-p

Instrument pack or 10as fault seen it lots The lack of gauges working is one clue

Nice work oatcake pm returned

Sh1t I thought my ally was being eaten by sum kinda worm

Rev counter uses same bulb holder as fuel and temp gauge Interesting to note the mod for the clock bulbs Top effort for ur support Appreciated

Yep me's posh got the row spec Tdi rev counter at great financial ruin lol

Ha I've got them holes too It's on the old need to fit list

Just had a look on eBay and I might as well fit led for longetivity don't suppose yas know the other type bulb part number by chance? I don't have a time clock so it's ok

Thanks for that oatcake

Yep used to get it in a small nail varnish type bottle, came with a stencil that was clearly to wide compared to the wire u repair Had more success making a very fine stencil from decent card, a lot neater but a lot of patience needed a damn steady hand

Whilst we are talking td5 bulbs has anyone seen the crazy price charged by the main dealer for the two in the speedo, hmm got quoted £15 each Am gonna go to allmakes me thinks

Are relays under seat ok, good contacts and clicking? Also a blue block of contacts and splices that can corrode Check em to cause it can get damp in there, an additional earth ran in is a good thing

If you are repainting with NATO green then a rollers great but if you going for a total colour change etc it's best sprayed