Just sent them an email asking same question and details I have Lets see what they say Thanks Mark

Found this now !! looks like this is the bit just how it fits!!!

just been and had a look. No holes at all just that notched hole on the pic I posted?????

That would make sense - great but the box section bar looks like it is welded to the side bits. I was hoping it was bolts / twist lock? Thanks for the help

No marks at all. I looks like nothing has been fitted. I am wondering / guessing that the main bar and the plate for the tow bar as you say was never fitted and I hope it is a part that is available to buy. I did email Westfalia but they never replied - Thanks Mark

Hi thanks for reply. The main thing I am stuck with - is what have i actually got fitted and what do I add to it? all the best Mark

I just looked for my oil invoice. I spent a lot of time asking about best oil to use. I ended up buying G-Force ATF-LV low viscosity Dexron VI I bought via amazon from Opie Oils - Great service from Opie. ( no connection at all other than an happy customer.)

HI Doobie, I bought genuine LR part. I believe this is so important I did not want to take a chance.I have the exact same model you say you have The LR part number on my invoice = LTHE500031 cost 73.42 plus the VAT. This included bolts for the pan and a new pan gasket. I just had to buy oil -...

HI, I have tow bar sides fitted to the chassis with bolts but no central bar/ connector? The part I have is Landrover Part no KPU000032 Westfalia part no 323 055 600 003. I am thinking there is a bolt on ? clamp on and lock? that straddles the two sides? I have attached a pic showing one of...

HI, All done, all went well. Great advice. I used the seat forward /backward movement and jammed the brake pedal down. I tested the brake fluid with a water test meter!! Was in the red. I changed it all out - Awful colour and full of water. Went well. Changed the Discs. pads and calipers and...

Thank you. I shall do exactly has you say above and get back to you. The ABS stuff that myfirstl322 mentions is not mentioned anywhere in the book so unless he knows another source of information? Anyway thank you to ALL that helped with advice and details and downloads. I will be back Monday...

So -What are you saying? The Rave books are really great and will help in so many ways. The rave book had told me which wheel to bleed in order and it has told me there are no Special difference's to the normal way.

Thanks for the offer. I have them now via the dropbox Neilly set up Thank you to all I now know how to do the brake bleeding and looks like I will have a lot of reading to do All the best Mark

No rush at all for me. Doing job on Monday. Thanks for taking the time to do this All the best

HI, Yes that would work and yes Mac's have USB ports!! They are pretty good for most things except windows stuff - Thanks Mark

Hi, That would be great. Thanks Mark

HI How did you go? Did you have chance to look into this. I can read PDF's just cannot down load this RAVE thing!!! If I cannot get this to download does anyone have the PDF section on changing the brake fluid and could they send it or post it here? Thanks Mark

Unfortunately I cannot get Rave - I only have an Apple mac and it does not seem to down load! thanks

HI All, Thanks for all replies. I had no internet access. I stripped down brakes and found one caliper to be quite seized, Both dics really worn with a big lip on edge. I have ordered two new calipers new discs and pads. I will fit these next week. I will also change the fluid as suggested...

HI, Thanks I understand that but is it just a bad / unusual coincidence that both sides front are sticking at same time? I was looking to find if there was a valve / sensor ? particular to RR? Rear are fine.