So I spent half an hour taking a few bits off today.....no big news yet obviously, but I did find this broken sensor thingy. What is it guys?

Why, what do you mean?...what’s the benefit?

So, after buying a 2005 Tdv6 with a suspect blown HG . The car has injector timing codes of p020a, p020b, p020c.(cylinder 1,2,3. Off side) The expansion tank is pressurising as soon as the key is turned,indicating exhaust gasses......it did run yesterday, but very poorly (maybe on 3)..and after...

Hi guys. so I’ve bought another headache. this one is a 2005 tdv6....purchased with a known suspect head gasket problem......this one is pressurising in the expansion tank. yesterday when it was delivered with a very flat battery I got it running for a couple of minutes and it sounded fine...

For anyone with similar issues or anyone else interested I’ve fixed my problems, I’m not sure of the precise issue but is was definitely related to the passenger footwell part of the loom/area. I found a couple of the earth points to be slightly rusty, so could be that. I also found that the...

I’ve got an SE manual and a HSE auto.

Hi Gary. It’s a 2006 HSE It has nav and memory seats, but doesn’t have an electric steering column. unfortunately I don’t have the Iid tool that can program keys...I only have an icarsoft (until I can get back to work and earn some money,lol)

hi I’m happy to tackle anything , I’m not good with electrics but I’m very mechanically minded.... I only have one key for the car and no I don’t have an electric steering column. Thanks

No, definitely B1B85 MEMORY CONTROL MODULE

Hi Gary...many thanks for the reply. today I have removed the cjb I have cleaned every contact and earth, replaced every fuse with a new one (ott maybe). I’ve put it it back together and everything is working perfectly. This was a couple of hours ago, just checked again a minute ago and still...

Hi Unfortunately no further forward....sometimes everything works, then next time none of it works... I’ve had both seats out and checked every wire and rejoined every splice. the only bit I haven’t done is the harness where it goes up from the footwell (passenger side) into the fuse box...

Today I’ve checked every wire on both side with the seats out. Every splice I have removed and redone....unfortunately no luck.

I think there’s one built into the seat module under the drivers seat, but it can’t be that as I’ve swapped the entire seat out of my other D3.

Gents I bought an icarsoft today (I know not the best but I’m broke atm)......it pulled a code of B1A56 drivers seat slide relay failure.....any idea where this is located?

Unfortunately not...

So today gents. I stripped and inspected the loom on the passenger side, all was dry and looking fine. I unplugged the sunroof module, to see if anything else came to life, but nothing. I did the same with the rain sensor and the drivers seat....no luck. Then I swapped the drivers seat with one...

Hi guys, I’m looking for someone who knows about the wiring on these cars. I have an intermittent problem. 9 times out of 10 times the drivers electric seat will not work, when this happens the electric mirrors won’t adjust (although they will fold)...and the sunroof will not operate either...

Yes, I will get one....once I go back to work and earn a few quid. Lol

Unfortunately I don’t have one.