thanks for the quick reply. I changed the latch pdq as my passenger one went some time ago and i remember what a nightmare it was. With 2 kids and only me to get them to school, or emergencies I probably psanicked as I cant afford to be without a car. Any easy, or cheap way to diagnose wire...

Sorry - excess, not access

I was worried about keys so got insurance with spare key cover. No access either.

Hi Guys, My drivers door (RHD) suddenly stopped operating via the remote. The remote still works all other doors, locking and unlocking them. The key opens and closes the driver's door, and this also works all the other doors and boot too (connected to the driver door apparently). I read it...

HI, sorry to message you, but reading threads it looks like you my be the best person to help with my current problem. Battery went dead on my 96 p38 this morning. Charged battery and 'lockout' appeared. Entered EKA inc 4 X anti turns but still nothing. Had to get ex wife to take kids but need...

Well i must say a HUGE thank you to everyone who helped me sort this problem out. I finally found there was one connection not giving continuity under the wheel arch (the middle one). When i traced the wires i found the problem immediately. Where the wires come through in to the engine...

found the ecu, got the multi plug off and gave it a good tooth brushing. Now cant get the back bags to raise using the EASunlock like i could before.

Thanks for that. At least it's not under the bloody car again.

Well the saga goes on. I bought a multi meter and read the sensor. it goes up and down las smooth as anything. I presume I now need to find where the EAS ECU is located and find the loom and give the loom connections a thorough clean next. Stupid question coming up. Where is the EAS ECU?

Thanks yet again. I will try and swap the left and right sensors first. It's getting to be a very painful job as I am currently waiting for an operation on my slipped disc and the drive is just large gravel (god knows how those blokes lie on a bed of nails). I asume that cleaning the...

Hi again, Yesterday i thoroughly cleaned the new sensor, old sensor and the connector under the wheel arch with contact cleaner and a tooth brush. The fault is still there reading FR: Signal incorrect. Any advice on what to look at next guys? IT is getting me down, literally, as it still...

i think so. how should i shut it down? Just in case i'm doing it wrong.

Cheers guys. I cant reset the eas as every time i clear it via easunlock, when i turn it off and unplug the software it comes straight back. A trip to Maplins is the first call for some proper cleaner i think. I'll update once i have tried it. Thanks again.

Thanks Wammers, if I find the sensor IS working, what should i look for next? You seem to be the oracle around here and i would appreciate your advise. P.S. I havent got a multi meter, any other way of testing?

Thanks, i thoroughly cleaned it with WD40, and the receiving plug, then let them dry out before linking them. I will try swapping them tomorrow as I have the kids home now and dont want to bugger it up and find i cant get them to school in the morning. P.S. i fixed the passenger door and...

Hi, When i higher and lower the front right sensor the reading remains the same. It is a second hand one that was tested before i bought it and has a 90 day guarantee. I thought the sensors were 'sided' but maybe someone could correct me and i could try swapping them.

Hi Tim, I have the software and cable and you can re calibrate all height settings. They are actually in units not mm or inches so apparently you have to adjust te units then re measure. It has the ability to calibrate each individual wheel. My problem now is that I have changed the sensor and...

Hey guys, Thanks a million. I am very new to this so please have a little patience with me. I'm extremely sorry to look stupid and didnt mean to get anybody riled, it wasnt intended. I was going to ask if anyone can point me in the next direction after i put the new sensor on. The fault is still...

Hi, thanks. I did find some 'ranges' but it didnt mean a lot to me. I wanted some actual heights in mm or inches so i can be sure i have the correct heights all round. as I have a fault, the car slopes and the drive pulls so i want all heights bang on.

Hi guys, I am about to change one of my height sensors today and will need to re calibrate the ride heights. Unfortunatetly I can't measure my existing ride heights as there is obviously a fault. Has anybody got any measurements of each of their ride heights for each weheel, from the centre of...