Thanks for the replies, once I cleaned them up and got then moving they loved a lot more freely, I will grease them up and see how they are. Now just to separate the hub from the discs which might be tricky as they are terrible rusted as and badly warn and put all back together! Once again...

Ok thanks

Took the other bolt out and came away cleaning! Thanks help guys!! A quicken question should the pistons on the calliper move freely?

Ok thanks for your help! Hopefully I have more luck with the other one!

ok thanks i will give that ago in day light tomorrow. is there a nack to undoing them, just this ridiculously snapped easily.

Thanks for the replys is it as simple as undoing the 4 bolts to split the caliper?

Hello, I'm a little stuck, i was going to change the hub seal, as it was leaking grease everywhere so decided to do it before it go any worse, anyway went to removed the first caliper bolt using the bi hex 13mm sock on 1/2 ratchet and it snapped clean off about half way down the bolt thread...

Could you PM pics?

Thanks for your help. I'll have check tomorrow and see if can see any leaks and make sure it not seized.

Thanks for the advice, I will check it at waste gate T connector tomorrow and see what it reads. @Trax that is where it is located and it a M12x1.5 bolt. What's best way to tell if waste gate stuck open slightly?

Hi, Sorry in advance if this has been asked multiple times before, but i did a search and didn't come up with an answer. Just installed a Tim's boost gauge (upto 2 bar) on my defender 90 300tdi. I fitted it by removing the handy bolt on the back of the manifold and replaced with a banjo with...

Hello new here, fairly new to land rovers to. Currently got a 90 300tdi. Just thought pop in and say hello as been spending a lot time reading up on here.

Thanks for the reply's, i will get some 15-40 mineral diesel oil

Hi, I've just bought a Land Rover Defender 110 1990 2.5 TD and am going to give it a service, just wanted to see which oil you guys would recommend, i have some Castrol Magnatec 5w-30 FUlly Sythn and wondered if this would be ok? Thanks Howard