Heck!!! No, I couldn't cope with that but thanks ... I have tried on the wiring too, but nothing happened...I even put an inline fuse on the Positive side too, just in case. . Titch

Top Man thank you... I shall relate to all this thanks. Titch

Thanks on this... I shall study the images.. I guess you're saying how I need to just get 12v Live to the seats existing electrics and Earth it all of course... I shall have a good look later today. Thanks for the response! Titch

Hi again folks.. I have searched inevitably, but I'm just overwhelmed by it... How can I tell, other than the 'sticker' on the BECM fuse box.. which on my 1998 2.5 DSE is simply illegible.. although I 'think' I did see a letter 'L' on the lower front Left.. as opposed to the top left.. I was...

Recently bought myself a White DSE Auto. ALWAYS wanted White.. which will need the lacquer sorting at some point. On air, fairly tidy really, but I intend this to be a keeper as I've been looking out for a White diesel auto for quite some years.. if I find one it's too far away though. This was...

Send me a picture of what you want exactly Flossie! Titch

Previous owner was a Titch like me.. not sure if I do want to keep them on though...

I bought another one.. DSE Diesel this time.. Suspension bushes to change etc etc.. but.. quite happy with it to be honest and I've wanted a White Auto for a long long time...

Fingers Crossed Flossie!!!! Titch

All done! Used Polybushes on the front radius arms and new track rods with joints. Got a good 12 month MOT on it now...

Couldn't seem to rid of the Airbag Fault message knowingly.. but... it has gone now so it MUST have been one of the connections, annoyingly I didn't 'see it' disappear... if that makes sense?? Thanks again to all advice! MOT picked up on front radius arm bushes and track rod ends.. so hopefully...

I've just used Footman James again, Classic Policy and more than acceptable. I use them for a couple of bikes too.. I find them faultless. Titch

Thanks on that!!

Taking my 4.0 for MOT next week... I'm always nervous. but then, if anything crops up it's always for a reason.. legal & safety one's at that. The outcome of the test will confirm as to weather I invest in a Nanocom for myself ( when I find the Piggy bank!) Today I'm aiming to sort the 'Airbag...

Well, the rear is.. just the front to do this weekend... I am feeling more content now.... Titch

Very neat Flossie!!

Well, I do feel that the temperature is reading OK on the sensor.. get's darned warm through the heater etc and heater controls do work accordingly yes! Titch

It will be smaller on the metalwork Flossie, but I used the existing pipe which was there, using an inline straight coupler from my new matrix hoses to join up.. Otherwise, you may need the verniers.. Titch

I worked all underneath the pedals etc Flossie, yes, a bit of cutting of ducting etc..NOT an easy job I didn't think at all..but feel happier with the Nissen matrix in that I fitted new heater pipes up through the bulkhead too.. I see it as a better fitment than O rings.. which inevitably won't...

Ah! About to do mine soon too, so that's a reassuring note! Same make already purchased... Titch