Got access to oxy acet if you wana come make me some lol

Bugger no worries thanks for help...need to try and find one of the anchors that wrap around tube now

Cool il give it a coat of measuring and see what I can do thanks...just another quicky regarding the diagonals to back...its going g to be impossible I think to get it in car all welded in place...can I cut diagonals in half then sleeve them with tubing over top and welded in place...or would I...

Hi Jai Thanks for responces.. opt 1 ) - iv got reasonably long seatbelts but they have the bolt eyes on rather than the Wrap style ones you can get.. op2 ) can the chanel go past the rear stays? or does it have to go within? hopefuly diag will explain better. op3) not got the wrap...

Hmm need to find that now then...could be awkward welding threaded bar in and keep g the threads in tact :S

That was my idea but I'm not sure there's enough distance between cage and harnesses not sure how shirt they go..iv seen the diagnosis though. What I can't work out from diag is the tube that I bolt the seatbelt to...I have to tube it with 20 mm and 50 mm section...does this need to be threaded...

tried this in the offroad section to no avail and only 44 views so thought id try my luck here now ten chaps, im in process of building my disco cage and am now lookign at seatbelt mounts. the belts i already have have the bolt holes fixings for the shoulder straps rather than the ones that...

yep il say when i get renewal (next week or so i hope)...

i wont say the name just yet il wait to see what flux come back with on my renewal, but when i was talking to the chap he says they are well known to flux as possibly one of their main competators for car/4x4 insurance etc, i mnaged to get a quote of 377 FC for d1 with ALL mods declaired where...

so was the diag you showed slightly wrong or just youd wired it worng, ratehr check before i bugger something up lol

how soon in advance do renewals come through as im due on 28th and have been quoted by another company almost half the price of what im paying now with flux

now ten chaps, im in process of building my disco cage and am now lookign at seatbelt mounts. the belts i already have have the bolt holes fixings for the shoulder straps rather than the ones that you wrap around a pole, looking at msa book for my belts i need to put a tube within my role cage...

brilliant, makes my shopping bill a bit cheaper lol..thanks

so if I were to run, 35mm from 2nd alt to boot, then 70mm from batt to winch that would be fine, when under load ( the winch) would that put any extra strain on the other cable considering its approx. 5 meters from alt? or would I be better running 70mm from front to back and to winch (don't...

its for a rear winch sorry, front winch is connected to main battery..rear will also power all lights cb and any other toys

ah fender not disco, no worries...im just wondering what power cable id need to run front to back that's enough to run a winch from,

cheers for that, is your 2nd battery in boot?

can i be cheeky, do you have any wiring diagrams for the 2nd alt (its on my list to do) also will you be running a winch off 2nd battery?

cheers for the links to vids, not sure the belts I have will allow the wrap around but will check tomorrow, if not it may be a case of doing the bar through option :(

can i weld tabs onto the horizontal then similar to the ones in this pic below (hopefully)