Personally I would make my own brake lines and for braided use llama 4x4

tbh 2mm should be fine unless you plannign on fastening loads of weight to it, then id go with 3 for abit more strenght for fixings.

got the email and seen the FB page, im going to try and wangle some dates from work and see if any body else is up for it.

in theory its simples yes, but regardards the plugs under neath does one feed 2connectors, brakes and engine fuse, and the other feed the other 4 fuses? if i removed the fuse for brakes (abs) would this break the circuit for the engije start (not something i can check at minute as looms in bits)

Any body really clued up on them? Any body ever stripped one? Got a question regards the wiring of it.

fair enugh, TBH i will end up labeling most cables, but im trying to leave as much of existing loom alone as possible, just getting worrid i might have cut a wire i shouldnt have under engine fuse box :S

right guys as some of you may be aware im sorting my 300tdi out electrical wise.. now iv got rave whicj is ok and helpful but iv seen diagrams knocking about online in peoples posts but there in colour, like the one in this link 300 Glowplug relay wiring Puzzle - International Forum -...

when you say correct colour coding is there a definitive guide for this or is it per manufacturer?

i might not have stated it was 300w (well 280) in this post, I worked out at 13 to be between not running and running, but I like your thinking of 12v than its covered and sorted.. well I set too with Stanley knife and snips and some massive balls and have started to remove the...

any body

I must have worked it out wrong...300w light bar 300/13=23 am I wrong?

Hmm my led light bar plus more than that I think but everything else should be fine...

the only issue i had with flux was renewal time, they always put it up, but then when you shopped round found it cheaper they could always match it...why not just offer the lowest price possible from day 1 rathe rthan messing around..not a company for me any more, moved 2 cars and my wifes car...

Has there been any more info if your getting more..I fancy a yellow top n mates after a red.

you love your 200 electrics dont you hehe..im guna have a go with 300 wiring and if all else fails..get an auto spark involved lol.. what was the cable rating you sed through out your dash build as it looks fairly meaty.. iv put a post in general if your able to cast an eye

good little post that thanks DD69

Nice one...I know the tester so should be ok but thanks for looking it up :)

You would.need to make a bracket for alt to sit on top/side of pump and another belt

No worries thanks for that

also, rather than fusing everything before the relay, could i used fused relays instead?