cheers mate i think i will give them a phone tomorrow mark

Hmm now heres something to note i changed the maf plug round that plugs into the cars maf plug and the engine rev's from 800rpm to 2000rpm 0.2 of a second faster than it did before and seems alot more willing to rev. I mean the white dot is at the wrong side if you know what i mean? There is a...

cheers for the reply's guys.i will give that a go this afternoon and report back. am hope its something as simple as a faulty switch because ive double checked all plugs and maf are as they should be . its got me stumped no black smoke etc under hard acceleration etc mark

hello folks i have a couple of questions for you guys that have the synergy 2a+ fitted to your td4. first off i got mines about 2 months ago and to be truthful cant feel the difference :( all filters have been changed even the turbo vent filter. egr bypass has been fitted and inlet manifold...

fingers crossed for you mate

Cant see it being the hg most probably a hose

dont think they are

I had this problem when my interior light fuse fused dont know if this could be the same problem for u mate

Carlube atf-u is also what ive used. No problems to report :)

Thats the first and last question he will be asking :)

have a read of this mate :) http://www.landyzone.co.uk/lz/1620217-post9.html

Ok so it moves but only about 3/4 mm at the most anyone?

how is the best way of testing this? should the arm move when u blip the power ? the reason i ask is the td4 still seems down on power under 2000rpm even with the synergy 2a+ and pierburgh fitted :( boost solanoid ? mark

I used stuff called carlube atf-u. works fine no problems to report :)

ok guys ive found the leak in the boot :) its coming in from the seal where the hardtop meets the car if you get what i mean. the window part of the seal not the door part. does anyone have a part number for this ? also a part number of a membrain for the back door as the past owner has sliced...

When buying a freelander your lucky if its even got a vcu :)

I will have a look at the pully. No clutch as shes a auto and only run her on shell or esso diesel with 2 stroke and the millers eco max stuff

I took the needles off a fiesta once to put on a white backing. To cut a long story short i run out of petrol gauge said there was quarter a tank and speedo was reading 30mph doing 45mph. So i wouldn't :)

a bag of ****e is one way of putting it mate :D

guess your right mate as long as it runs :) if it goes bang then i will worry about it :)