couldnt get it of so bit the bullet and cut it.

i am working of that however they did not remover the coolant pipe which i need to do as i cant fit my hands in other wise cheers

hey guys as some of you may know i am starting work on my fpr. but hit a stag straight away i am trying to remove the coolant pipe closest to the fpr. i have removed the pressure clip but cannot get the pipe to budge. is there anything i can do to get it off because i think brute force might...

do you just remove the 8 bolts it think it is that hold it on. is there anything else. and should i replace the gasket. i only have 12 point sockets.

hey guys i am going to sort out my FPR but cant get to it. i was told that removing the intake manifold. can any one give me any advice on how to do it. cheers

Ya thats what i bought o rings and gaskets

I am planning on chainging the o rings and gaskets far cheaper that way

hey guy i have fuel leak and tracked it back to the FPR however i have big hands and cant get in there to remove it. any advice

ok guys will give it a good clean later today

hey guys need help on a leak i have. i have had it for while and am not sure of the problem. i have had it at 3 different garages and they all say something different one said it was power streering fluid that was left over after having my ACE turned off. one said a fuel leak and the other said...

does it matter if i torq it back correctly or can i just use normal spanner after giving it a real clean i found a lot of oil on the front of the head and the big black plastic disk on the front is loose i think it is the cam shaft seal. should this be loose

hey guys i am leaking oil. after investigation i believe it is the rocker gasket as i found a lot of oil residue around it and on the pipes below. the gasket was put in by a mechanic about two months ago. would it be fine to just take the rocker of and re tighten with out actually changing the...

so what about this one Airmaster Tiger 14/60 Air Compressor - Machine Mart

hey guy i am looking in to getting an air compressor and plan to build up a selection of tools to go with it drill, grinder etc. was just wondering what i should look for in the way of cfm and how big the tank should be. it is only for personal use. but i still don't want to buy some thing that...

well i have finally convinced the other half that a defender is a wise investment. feed her loads of bs about how we need one in the winter and she fell for it, happy days. so my budget is £5000, not a lot i know for a 90 but was wondering what you think i should look for when buying. i am...

so is there any out there that are compatible but lower budget

hey guys i am after a diagnosis tester but dont have the money for one of the good ones. was just wondering if this would work http://www.amazon.co.uk/CAN-Bus-Trouble-Diagnose-Diagnostic-Scanner/dp/B001CBBY7O/ref=sr_1_4?s=automotive&ie=UTF8&qid=1354910742&sr=1-4

how do i remove the ones that are already on.

hey guys. am going to change my battery as suggested in a previous thread but i would like to change the connectors while i am on. as both the bolts are seized and can come of while driving. but i am not sure how to do this as i can see any bolts holding the cables to the connector.

thanks guys