Hi my cables are all over the place so i am going to purchase a complete mechanism . The only problem i have is the motor its self i have removed it and put it on a battery it runs both ways but i is not stopping i thought there were sensors in there to stop it going on forever if it does not...

Cheers that will be the next job as i noticed when i removed the rubber strip from around the window and the glass was down to the bottom the cables looked slack and thought that can't be right so as you say i will check them thanks again

Hi the window moves a little bit (blink and you would miss it) i disconnected the battery when reconnected window went down turned the key in the lock window goes up and stays there , do you think it could be the cable adjustment i fitted new cables but not saying they are tensioned properly thanks

Hi the window does nothing when i pull the handle , the door unlocks and i can open the tailgate but the glass catches at the top but when open i can press the glass down by hand about an inch but when i close the door the glass rises to the top so it is working one way only thanks for replying

Nearly all sorted now but the tailgate window does not drop to allow the door to open if i use the dash button i can lower the window and when i close the tailgate the window will go up but why wont it drop that little bit to allow the door to open . But i have noticed when i have opened the...

Hi guys just fitted a CCU and another fuse board now and a drivers door lock Now i have rear tailgate working glass drops but just not far enough / but drops on the switch on the dash / central locking of works of the key in the drivers door and the switch on the dash but the lock on my...

No its not i can forget about the locking issue if every thing else works i could even fit an after market locking system and finish off the rest for the mot the rear fog light and rear wipe / wash has got to work or i remove the wipe / wash maybe tidy up or replace the fuel tank carrier we will see

Tell me about it i have lost count how many cars i have over the last 55 years and most of them had lock or window fails even the mechanical ones seized or gears stripped a friend of mine has a 1975 MGB and it has a body control module that has failed and giving it interior light problems so...

I will see how i get on when the CCU arrives. Now all of a sudden since removing the drivers door lock waiting for a replacement my interior lights come one when i unlock the doors and go out on there own they do not come on when any of the doors are opened but they are not staying on now . I...

Thanks i have ordered another CCU its worth a try i am led to believe you lose the central locking not sure what else that is why it has to be programed but not to sure about that cheers

That is my next port of call but i believe the CCU has to be re programed Or i might consider hard wiring each individual component

All fuses ok removed fuse box today and all fuses removed and checked none blown checked body control module could no see any corrosion or damage No damage to wires i have checked all the switches now from the dash and all working how they should but still no live 12v feed to anywhere to do...

The car was parked up then the mot ran out and as it was a work vehicle he had no use for it so never bothered with it. Apart from the electric issues there is nothing wrong with it runs and drives perfect It only has rear fog lights and they are not working as i have said there is no power to...

The battery is nearly new no drain over night fog light does not work with the engine running or not bulbs are thanks again for replying ok

Hi i have done a continuity test on the handle and the key switch all working but no power also head lights on dip / no fog lights also no 12v to that switch either number 31 &15 fuses have power i have removed all the centre console so the switches can be checked connected or not am i rite...

Hi i have removed the tailgate window switch and the central locking switch out of the front console there is no 12v feed at either of them. But i do have 12v on the 1st peg of the relays at the back the one on its own in the middle ( the one without a number) when you look at the relays...

I do agree that the door open warning light when the doors are closed is one of if not the main reason for these problems as i have said i will have another look when my locks arrive to replace the 2 faulty ones and take it from there. Is there a way to test the locks or bypass the door open...

Hi i have done all that nothing happens key in the tailgate lock window does not move but if i put a direct 12v direct feed to the tailgate window motor it will go up reverse the feed window goes down , same with the tailgate door lock actuator direct 12v to the release solenoid under the latch...

Hi i did a continuity test on the rear door and they both work i have no electric at all on the rear only the number plate light has power i thought there should be a live 12v somewhere around to be honest i am not to good on checking relays but i will check the wires for continuity and the...

Thanks guys i do have problem with my C/L 2 of my doors do not lock of the remote i am waiting for a new lock for my n/s rear door and the drivers door locks on the key but does not work of the remote when i use the key it only unlocks the drivers door and nothing else so i know that is...