Not sure but it’s definitely got air coming in somewhere

It’s the clear pipe from top of filter by banjo nut and joins onto the end of the injectors and that is where air is gathered I also tightened up the filter this morning as that didn’t seem quite tight enough either

Well come to it this morning and I have air in the pipe from the fuel filter down to injectors and when I went to tighten the jubilee clip it wouldn’t tighten anymore but spun round so I’m hoping it’s pulling in from there so I’ll try a new jubilee clip on and get it nice and tight and see from...

At the moment it is as it came, I do have a clear pipe running down from filter to injectors and did have bubbles in it yesterday and at one point when I undid top banjo whilst turning it over I seemed to get more air in that pipe but persisted bleeding on injectors and pump and if finally all...

I’m going to try have another look this morning but hopefully it’s what you say and not the head if or anything serious

I don’t know when it last ran but I’ve bled everything possible and don’t seem to have any fuel leaks looking at under neath on floor, it had a recon head and injectors and new glow plugs before I bought

i think i've bled it the best it can be, i've tried starting with air intake un attached just in case but made no difference i'm thinking its something not to massive but im just no mechanic so worry about timing issues etc as its beyond my remit

Hi guys Just bought a series 3, 2.25 and it apparently has had s recon head and injectors and new glow plugs, I’ve been trying to get it running for 2 days, I’ve bled all the system today and managed to get it started on idle but after only 5-10 seconds conks back out, is it a fuel thing or...

Sorry I’m new on so not sure what I need to post where and don’t want to **** people off when I’m asking for help

I’ve bled the 2 on the side didn’t even see one on the top, wasn’t sure if it was a general timing or pump timing issue although still seems fuel related, it starts ticks over for 5/10 seconds and cuts out , doing my head in lol

Got her stated on the button but won’t run just conks out any ideas I’m totally clueless lol

Morning after a look this morning I’ve now worked out that the glow plugs are wired up incorrectly, and also bypassed ballast and not grounded to block off last plug, I’ve attached a picture to show wires coming in as not sure which ones should go on ballast and which side, the rest of it I’ve...

Morning after a look this morning I’ve now worked out that the glow plugs are wired up incorrectly, and also bypassed ballast and not grounded to block off last plug, I’ve attached a picture to show wires coming in as not sure which ones should go on ballast and which side, the rest of it I’ve...

hi guys my name is shayne and i have just joined having bought a series 3 landrover, i have looked on before and seen that there is some very knowledgeable people on here so i'm hoping for some help lol its been a while but for some daft reason i have decided to try my hand again, i had...