Thanks friends

battery at its end of life?

Hi there!!! I think you get confused, I never upholstered the doors before, I just made a rigid rear tray. Anyway thanks for your kind comment. Thank you very much. It is laborious but it renews the look a lot, it also removes a certain smell of rotten foam. Good luck and don't forget to glue...

Hi. Hi. I have remus switchboard installed and I have not modified anything. It goes very well. I run it with non-aggressive programming. If you don't do the wild and use it wisely, I don't think you have to modify anything. If you continuously demand more power, things will change. Good Luck.

It looks much better than the old cloth. I put a relief in the gap around the upholstery, so you cover what you don't want to see ... some small finishing flaw. This relief is unglued because I have tried it in different colors and it improves a lot. Maybe in the future I will change it for...

Hi: I bought a 10mm diameter and 1.20cm long wire to install a second ground wire. Does it make sense to install a second negative cable in FL1 Td4? Which has benefits? Where does it connect? Thank you.

I have changed the old and dirty door cloth for black leatherette

Search "Jatco barrel"

https://www.landyzone.co.uk/land-rover/jatco-auto-box-is-this-true.231171/

One (or more) question (s): I had seen two Fl2 2.2 TD4 HSE one manual and other authomatic. one MY07 and other MY08. Do you think is better manual with new clutch or authomatic? Are there any known torque converter or solenoid faults? Do yo know in what year LR installed haldex gen4 or from...

Hi Andy: Engine stopped: hard pedal. I start the engine at idle: pedal Ok. I step on more than 10 times and continue well. Engine stop: at the third step it gets hard. I replaced vacuum pipes and reservoir because I broke an outlet (very fragile). As Nodge says, it carries a check valve. I have...

Hi. I did similar system with a water filter holder container glass with narrow cooling sleeves and filled with steel filaments. Let the air pass but the oil remains in the glass. There is no danger of the filament coming out. It worked perfectly for me. It collects a lot of oil from the...

Hi matt: What a very beautiful area do you live in!!! I have had Freelander 2 TD4 year 2007 manual. Like everything, it has its good and bad points. Good: very good size, excellent finishes and comfort, smooth handling, powerful, reasonable fuel consumption, it is a joy to drive on the road ...

Bad Bad Bad. Sorry. I follow this topic with interest.

Ok. Thanks. I floow this threat with interest.

Thanks. How can I check that the support bearing in the ird and CV is ok? (sorry what would you say "CV"? my english is "brillant")

Hi Andyfreelandy: I have both front ball joints. My nexth project it was going to be changing the ball joints or the complete arms. is it worth just putting on the boots? my kneecaps don't make noise. If you see it possible, can you please add photos of the work and where buy? Thank you!!!!

Hi GrumpyGel. The pressures are Ok. I have a tpms. Tyres are Ok. The noise seems from the front right wheel. If it was due to different pressure the noise would be heard with the steering wheel turned to both sides and only sounds turned to the left. There were traces of grease in the area of...

Hi jedi. Thanks for answer. I did VCU test and is Ok. If VCU was the problem I think the noise would be heard with the steering wheel turned to both sides and only sounds turned to the left. Isn't it?

Hi Friends. when starting a movement or driving very slowly (1st gear) forward and with the steering wheel fully turned to the left makes a noise woouUH! woouUH! When accelerating it disappears. Ideas? CV joint, transmission, VCU bearings, transfer (I hope not)? Thanks and stay safe.