Get LM2 Grease Bar-600mm is fine Torque Wrench- anything up to 300nm ish about a 400mm long Washer & gasket numbers (frc3988 maybe)...no idea off top of my head Ref the nut torque...without the torque wrench, tighten alot & loosen, then tighten with a standard ratchet wrench.Then add...

Yeah only 1 flange gasket then. Torque setting is 210nm.

If the bearing doesnt come with grease, buy a pot and get some brake cleaner to clean the old crap out of the hub. Ref the spanner, personally I bought a 52mm deep socket and used it on my 1/2" drive breaker bar and then on my 1/2" torque wrench to tighten... There are 2 nuts on the end of the...

Oh sorry...blackberry is annoying on the 'net! The drive flange bolts are normally ok ... Put some loctite on when you put them back on.

Another pointer...your caliper bolts will probably be 12 point heads (on the back face nearest the track rod)...a normal 6 side socket won't get them off...they are a 12mm I believe from memory.

Oh and there's nowt wrong with second hand swivels...you can see if they're ****ed and if they're ok just replace the seals

Busters threads will tell you how to do it....and paddocks do a swivel seal kit. Normal torque wrench fone and sockets plus ring spanners...you need one of those to release the swivel from the axle case as a socket won't fit in the gap. You say you have a weekend...start early as you can cos...

Why don't you try and source second hand swivel housings? I hadn't a clue before I rebuilt my axles ... Its really a lot easier than you think. Take your time and you'll save yourself loads of money and learn a lot in the process

Front suspension and axle now finished...outrigger and wiring left plus seat belts and a jolly up..oh and tyres...

when i was looking i looked at hydronic 5 models...but then i spent the money on me roof rack and havent bothered since!

td5 pumps have the take off for a heater already...its normally just capped off if you dont have one.

everything is my latest favourite gadget!

2 bolts...

that swivel ball is ... pooped! try some VERY fine emery & fill the bugger with one shot..might save you some work

Storm...Gman's gonna get jealous!

Thanks mate...we did Morocco in 2009 and once I've finished the strifes 110 funds will be going in the Norway money box.Top of my before you die list though is S.Africa and Russia...but apparently I'm needed to father another child before I'm allowed there :-)

with injectors @£200 each ive never ventured into the bio world ...

Flux...£340

Just some info that might answer the numerous threads on "will it won't it?" If you wish to run this set up then you will have NO issues with tyre rub on your arches at all...in fact there is still a good 20mm of space between the tyre & arch when sidewards...and to the "you shouldn't have done...

You can get special tools off eBay...worth the money. Or try an air chisel.