Also changed the brake light switch under the pedal for good measure - no change.

Replaced the ignition switch today and the problem is still there.

Hello all! I'm after a set of the above if anyone can help me? I'm located in the New Forest! Cheers!

Hello all! Been looking through all the other posts to no avail so here goes!!! When I'm driving along in the wife's Freelander the strangest thing happens on a regular basis. ALL the gauges stop working, Fuel, Temp, Rev counter, Speedo. All the lights come on, HDC, Handbrake, TC, etc...

Fantastic photographs, looks like you're doing a great job!

Bonnet pins sounds like a better idea, advices please!

Right, so feed through bolt, pull cable tight with mole grips, then tighten nut?

I see the cable goes through a small bolt with a torx type nut on it but shouldn't there be some kind of fitting on the end of the cable?

Hello all! My 1997 Discovery has always had a cable coming directly off the latch and out the front of the grille as the cable had snapped on the previous owner. This temporary fix works fine but I would like to replace it properly. I've bought a new cable, bolted it on under the dash...

My bonnet release cable snapped recently! I managed to get the bonnet open without removing the headlights or grille. Facing the car, I peered up through the centre of the grille to where the mechanism is located. If you look closely there is a small gap where you can fit a long...

Think I need to do mine (97 300TDI), water in both footwells, misty front screen etc.....

Found this: MOT changes from 2012 | AA

Dropped plug down behind engine, crawled underneath car and had a look, plugs straight into the back of the gearbox. Reverse lights now working.

Just discovered that the plug in the first picture operates the reverse lights when bypassed, just need to find out where it plugs into, the gearbox perhaps?

Also, I have the 'Three Amigos'. Changed the brake light switch for a modified one but no different! Grrrr!

Could anybody tell me where this is supposed to plug into please? It is attached to the inner N/S wing and is just hanging unconnected! http://i160.photobucket.com/albums/t170/megadeth1976/hippo001.jpg Also, this wire seems to have been cut, any ideas...

Sold the Freelander to an Australian chap, within 3 months he informed me that the head gasket went, it cost him £1500 to get it fixed. Then he sold it to a friend and it went again! I'll never buy one again.

Hello all! I bought a Freelander recently AFTER reading all the negative write-ups as I won't be doing many miles in it, it looks great and is ideal for taking my dog for walks in The New Forest. I am just concerned with all this talk of the head gasket failing and was wondering if there...

Thank you for the positive input!

Wow! It seems I have bought myself a whole load of trouble! I have always wanted to own a Land Rover but have never been in a position to afford one. I want to buy a Discovery next and keep the Freelander for occasional use. I signed up to this website because I thought it would be...