You don't want to much heat... The seam sealer becomes really sticky and messy if you do... It just needs to be warm, I did do mine in the height of summer so it was warm to start with. Once you get a knife through just work it around. Have you removed all the bolts from the inside? There is...

Hi mate, do you still need help with this, I have recently done mine I can throw some pics up if you like?..

Hence why being able to pin the crank is important...

:amen: my feelings exactly... :D

Cool :cool: I haven't done mine yet or should I say I haven't got round to looking at it yet. I'm hoping it hasn't been done as before I took it off the road it was sluggish off the turbo to say the least....

Are you doing your bearings as well or just discs and pads?...

Yeah I was able to drive mine around for a year first... Can't wait to get it back on the road :banana:... Best of luck for when you do yours lots of pics :D

AHHH now your making me all weepy..... :) Thanks mate, it is a pain putting stuff away but if you saw my garage you'd know I've got so much stuff if I don't put it away it gets very messy very quickly.... My wife already thinks its a s£$t tip....:D Although its taking time to do I'm really...

Yeah I look back at the beginning and it does encourage me to see how much ive already done....

If the timing is slightly out that can cause it to run rough.... White smoke is water usually, which if the car drowned could just be residual in the exhaust, also old fuel tends to be more smoky if its been sat for a while. Has it been on a nice long run to get everything nice and hot since the...

Hi mate, just in the process of changing my belt. Had a hole in mine but no notch. Started a thread on it, eventually found it up the side on the engine back plate... I know yours is not the same and that you have done it now but it might be worth a look for future reference if you do the belt...

Ahh cool... I'll see how I get on and maybe invest in those if the one I've ordered doesn't work :) I just think at the min its still so long I'd just ring it off again further down the shaft. Then if that doesn't work I will have to take the timing case off and use the ones you drill in...

Which ones did you mean mate?

It really depends on what quality you want... I don't think I've gone for the cheapest but certainly not the most expensive. I don't intend to do mega heavy off roading though just in the forest and round local fields so I didn't see the point in mega buck stuff. Best of luck with it though, I...

Ok sure... The reason I ask is that I think this one is not only rusted in the block but the ali casing has reacted and that is making it stick as well. So by using the impact wrench I can just jar it open bit by bit. I think if I just got a bar on it it would shear off again... We shall see...

I will try one off the shelf and see how things go :D

Yeah..... Not sure its a good idea publishing your illegal activity on here mate :D oh and who is Moush??...:D Only joking..... They do look good. I have ordered the clamp one on the line because for a long way along the shaft and can be used with my impact wrench. Can you use your ones with...

Thanks mate, I'm glad someone is enjoying it.... :D the info may not be the best but I'm learning as I go. Cheers again there is more to come...

Yeah it seems a lot of mags are doing that. EVO, that I have just cancelled, has some awesome articles from time to time. However more and more they are having "advertising features" in the mag. So the articles are sponsored by say Goodyear for example. I don't like it because it makes me...

In reference to what mate?...;)