Try Britcar, I'm no way connected to them lol, just where I get my bits from as they are down the road. They sometimes have them on the shelf www.brit-car.co.uk

Part way thru doing mine, pleased with the results so far. Sides and roof sound proofed and covered in carpet

I have just put one of those on my 90, not used it in anger yet but very well made out of thick steel and all the bolt holes lined up ok !

Deffo !!! I've just built some rock sliders out of 40 x 80 with a 4mm wall, my Clarke TM160 was blowing holes in it on full power

Deffo on the pry bar, I use mine for all sorts..... A punch and chisel set also ?

Screwfix sell Sikaflex, I bought some from there a couple of months ago, grey white or black.......

A sad sad picture, not sure if anyone has put this up before ! I'd like a few hours scavenging thru this pile :eek:

Had a good day today, done some more lining in the back, used some 6mm ply that I had left over from our horsebox Just a little more to do, hopefully will finish tomorrow

When I put axel breathers on my series I took one of the old breathers into a local hydraulics/pneumatics suppliers and they matched up the thread ( not sure if its the same as a 90/110 which is 1/8 BSP ) I then bought some plastic pipe at the same time, whole lost cost under £10...... Must...

I have bought 2 right angle 6mm pneumatic couplings for the axle breathers, and my father in law got me some 6mm airline from his work. So both axels piped up for about £2.40 !! Have also done the timing cover breather and planning to extend the gearbox breathers too. Made a start on boxing...

Managed to get the snorkel fitted today, really pleased with it, bit fiddly to do inside as originally meant for a 300tdi but I needed one that fixed to the offside Also have set about making a dog guard to keep the hairy ones in the back

I use a eezi bleed that I have converted to run off a airline, thru a regulator at about 10psi. Works a treat, just make sure you don't run it out of fluid

I have done some work to the raptor dash, have more switches than I need but guessing they'll get used at some point, hoping to get some kind of iPad/android tablet to mount on the top right to run memory map or something

Jeez...... You could use those as auxiliary fuel tanks, I like that idea !!

I used 40mm x 80mm x 4mm, bit of an overkill but I like to build things strong. I'm pleased as to how they came out !

Had a week off work to catch up on my 90, I have painted and fitted my rock sliders Tidied up the back door, have used camping mat for insulation I cut a new door card out of 6mm ply and used the Veltrim to cover it Also used the same technique for the hard top sides, inside

I have joined the Essex mud monkeys too, hoping to come out with you guys.......... If you let me lol

We will have to meet up, I'm in Bradfield ! Look out for the 90, hopefully taxing it next week. I spent a couple of years restoring my 2a so know them inside out

Any ideas how to get in contact with the person selling these ? My father in law is after a pair for his disco. I have sent a message via the slroc forum

^^^ see above ;-)