1. Gordonthornton

    Hdc

    Hi If you dont think you will use it then dont worry about it, lots more things you can do to your freelander that will make it look good cheers Gordon:)
  2. Gordonthornton

    help please

    Hi My ird has just gone and in my case the car is un drivable make no mistake for now i have removed the props and the vcu and put in a ird blanking plate to remove the crown and pinion from the ird a fairly easy job and the plate only cost £ 20 result the car is back in use though 2 whell drive...
  3. Gordonthornton

    propshaft bearing

    Hi It is a fairly straightforward job just ensure you get everything lined up pays to mark where bearing mounts are before taking to bits and watch vcu and props are heavy Good luck Gordon
  4. Gordonthornton

    Rear Wiper gone mad

    Hi My first point of call would be to check the switch as this makes and breaks the contact does it feel like it is working normally ? Gordon
  5. Gordonthornton

    Rear Wiper Issue

    Hi Andrew Mine has done this also and it is caused by a build up of snow behind the spare wheel and forgetting about the automatic switch in reverse:doh: Gordon
  6. Gordonthornton

    Freelander TD4 Noobie...

    Most important thing with tyres is to replace both on an axle and ALLWAYS put the new ones to the rear welcome to the forum:welcome2: Gordon
  7. Gordonthornton

    Help?? vibration!

    Hi "ALLWAYS" put new tyres to rear and do it asap :D Gordon
  8. Gordonthornton

    Its not really gay though is it?

    Could be the exhaust fumes from a disco stuck in the snow :D:p
  9. Gordonthornton

    Roor rails - 3 door.

    Hi Tony I think flea-bay is still your best bet go for someone breaking a 3 door one or you could even post a want it now has worked for me in the past Good luck Gordon
  10. Gordonthornton

    Roveron on an XEDi

    Hi Just noticed this thought it might be of interest to you Gordon Hi, since the start of this year i have been remapping cars of all sorts and like many people on here i have a early freelander 1 which can only be done by replacing the chip in the ecu. I can now offer this service for £220...
  11. Gordonthornton

    starter motor

    Howardo dont ask technical questions he he :D
  12. Gordonthornton

    tc and hdc light come on

    First and cheapest to replace is the brake light switch these are prone to going and will cause these problems while still working the actual brake lights they are flea-bay for between £8 and £10 Good luck Gordon
  13. Gordonthornton

    help! glow plug problem

    Hi If you search on this site for "Rave " download this will be a usefull source of information for you and is worth its weight in gold Good luck Gordon
  14. Gordonthornton

    Some advice and help please...

    "Please dont get me wrong im not meaning to sound abrupt :o and thats funny you should say that Gordon as i do actually have only one Kidney so giving the other away would not be good lol" Hi Dont you worry it was said in good humour :D It is well worth following O P`s advice though...
  15. Gordonthornton

    Starter Problem clicking

    Hi Thanks for that i have had a look and at 107k miles i think my freelander deserves a starter repair kit good value and very clear instructions on there web site will be ordering one this weekend Thanks again Gordon
  16. Gordonthornton

    help! glow plug problem

    The fuse for the heater plugs will be under the bonnet not sure what number it is will be in your handbook though Gordon
  17. Gordonthornton

    Starter Problem clicking

    Thanks Chaser will do that your helps is appreciated Thanks Gordon
  18. Gordonthornton

    Some advice and help please...

    Well siad OP you would think you had asked for one of his kidneys lol:D
  19. Gordonthornton

    Starter Problem clicking

    Hi Guys A coulpe of months ago the starter on my td4 was clicking so i cleaned off the small terminal and all connections to the starter and all was well today it has started to click again up to 6 times before it starts when it clicks the clock light goes out and the brake lights...