Thanks

Hi I'm looking for some parts info if anybody can help I have broken one of the arms off of the the clamp that holds the engine oil hoses into the filter housing the part I need is ESR 1502 which became STC2305 Does anyone know where they can be gotten from as I have tried britpart lrdirect and...

Thanks for help all done new sump bolts new drain and fill plugs new filter, gasket, fluid, new cooler and hoses not bad for 5 hours work even if I do say so myself but would not of even attempted any of it without the help from You guys on here so much appreciated

Ta muchly

Great thanks I assume you meant no need to drain ?

Hi all am going to be replacing the hoses on my DSE as both leaking badly and possibly the rad if they end up stripping the thread just a quick question do I need to drain the transmission fluid first or is it jus the amount in the radiator and the hoses that will come out many thanks in advance

Hi didn't mean to cause a ruckus or any confusion just saying my sensors were are the ones without the lead and my car is a p reg 1996 but a late p most of the parts I have to get are for a 1997 MY so they must have just been put on as one of the first newer sets

Hi sorry been away yes island 4x4 the oem sensors ANR4687G rears ANR4686G fronts £119.98 per pair hope it helps

Hi just an update all done calibrated with the blocks via wammers dimensions altogether took about 3 hours to do Happy boy today

Hi yes both were broken so unusable and as for the the blocks no I am going to make them as per wammers dimensions in the how to section

Hi have a strange one for you the cars EAS was playing up again with a soft fault tried everything to no avail so crawled under to check the sensors out which were fairly new (britpart) I know !! Any hoo both sensors were snapped where they bolt onto the chassis and were literally just sitting...

Hi thanks for the replies ref the white plug that was corroded so I removed it and soldered the cables straight through the sensor is calibrated to be in the middle range of the bit points so wammers I will next try your suggestion of the faulty wiring connectors failing that I will get a new...

Ok well EAS will work fine for weeks and then all warnings come on and the lights go solid can't do anything with it put nanocom on and as soon as connected with EAS without clearing any faults car goes back to normal for another few days or weeks fault that is coming up is rhf height sensor out...

Thanks Wammers will give it go and see what happens fingers crossed

Thanks guys am going to try and make some for me to keep handy

Hi think I am going to have to do a complete recalibrate when weather clears up but it is just one of those things I can't get my head around you know something that should be simple but you just can't see it for looking hey ho never mind will keep going until I get it

Hi I was sure that the bits were within range by 5-7 bits but will double check this today thanks for info more info Have been out and adjusted the figures so that they are well above or below the min max bits so will give it a go and see how that fares fingers crossed

High Thanks for the help and offers of help ( pwood )I Have put a nanocom on it and found that the front right height sensor is out of range so will have to recalibrate and check sensor will report what I find whether it is a duff sensor or not

Hi No Not playing with EAS just tried to raise it once after a long drive but not having it as I say it goes into all the others fine just high it is having a problem with also I have refurbed the pump just before Christmas as I was having EAS problems then

Hi Fixed all leaks from valve block eas working ok Ish get soft fault now and again but when going through the height profiles I can get access Highway Standard but it is struggling with High just won't go there is the pump dying do you think Thanks for any help offered