New flex plate fitted £800 6x LPG injectors £400 ABS pump £200 New front window regulator £30 New RF receiver £180 New cam at v8 developments £1300 New janspeed exhaust £400 New front prop in France on hols £600 New drive belt + tensioner pulley £80 Genuine rear walnut ashtry £50...

Basic facts are, as an MOT tester my self If your vehicle is petrol and is post August 1992 it would be subject to a Basic Emissions test, this is a cut down form of the Cat test, designed to save some time! 90% of vehicles pass the BET, the rest will undergo a full CAT test if they fail the...

I shoved solding wire down mine It cured my dripping headliner when it rained

If you run on LPG you don't need the cats Due to it's low emissions.

If you make your own bio- diesel and want 25 Ltrs of methanol drop me a PM

Thankyou mate I'll send them a email.

Hi all ive recently changed my leaking abs pump for a secondhand one off flea bay. Does anyone know of a company who could recondition my old one so I can get it back on before this fails

When I had a new cam in my 4.0L,v8 Developments told me to use 20/50 and always use land rover oil filters due to some device in the filter to do with pressure.

21st-November-2010 19:23 - permalinktonybirch Hi I've replaced the A.B.S pump on my 2000 R R and wondered does anyone know of a company who would be able to recondition the old one.

21st-November-2010 19:23 - permalinktonybirch Hi I've replaced the A.B.S pump on my 2000 R R and wondered does anyone know of a company who would be able to recondition the old one.

Hi I've replaced the A.B.S pump on my 2000 R R and wondered does anyone know of a company who would be able to recondition the old one.

Hi mate thanks for your reply. If i remove my cat's will this have any effect on my mot.

Hi mate ive just read your reply about the janspeed exhaust. Iam going to buy one for my RR which like yours runs on lpg.What did you mean when you said that you dropped your cats? Also where did you get the chrome strips from that are in your plastic door mouldings. Many thanks mate Tony

thanks for your response gegs88.I am not sure what the webbing and clip assy refers to. what ive got is the bracket for the seat and the triangular bracket and the spring loaded roller will i be able to just replace this for the orginal and refit the pretensioner to it.

Ihave bought some replacement seat belts for my p38. The ones on my car have pretensioners the ones i bought do not. Is the pretensioner unit a unit that you fit the seat belt into or is it part of the seat belt and can not be separated. Thanks for looking

Hi all iam new to this so please bear with me. On a recent trip to france my 4.0 hse required a new front prop shaft,there was terrible noise and vibration from the old one so it went into the main dealer in beziers ouch.They got the car back to me the evening before i left for home.All was...