mount relay on drivers side, cant mind colours off by hand but if you take off the large round bulb cover you will see what colour of wires go to dipped and high beams. will not be solid blacks so either green/white, blue/black, or green/blue. will check over the next day or so with mine and let...

regarding instruments thats the way i originally started out, no speedo, tacho, and temp reads of the scale, everything else works. 2001-2003 models have same wiring plugs which fit straight in but you still have same problems with speedo tacho and temp, hence the reason you need to convert...

Part 2 now been bumped back to top listings 2004 freelander upgrade,part 2,interior,how to do it

bump

With regards to the interior, look for post Part 2 interior, any problems let me know

my electronics guru made me up a box which made speedo pulse work with new instrument cluster, lasted all of 1 day before instrument panel stopped working altogether.:( currently working out what went wrong, hence reason post has not been updated recently

goes to any ignition live feed,run a wire from any 12v source to pin 30 any colour you want

diagram sent

Hi All sorry for not getting back sooner, should be 4 pin instead of 5 pin, sorry about that. pins on relay should be numbered 85,86,87,30 86 to chassis earth 30 to +12v 20A fused feed 85 to +of main beam lamp also run new earth wire from this bulb to chassis earth 87 to + of dipped beam bulb...

straight forward to convert commercial to van, as the last post says stick a hardtop on to get rear windows, other side windows push out,all trim fits new ones get screwed in. DVLA are fine about changing bodyplan to make it into car, just done a 2006 one, and adds 1000s onto price of vehicle...

sorry guys work commitments have stopped me coming on as often as i would have liked, you do not have to change any relays YOU HAVE TO ADD ONE IN will dig out my wiring diagram and send you both a pm on how to do it. so put your old relays back in Stuart

Done a few of these, always clean out tank totally, it will be full of crap which will be making new pump noisey, its amazing what gunk you find people using red diesel sng chip oil. clean out works everytime hopefully you bought pump from eurocarparts at only 94.00

from what i can remember, front guard bolts onto bottom seatbelt mounts, under headlining abount two inches above top seatbelt mount you will find two holes, this mounts top of guard. middle brackets mounts onto front edge of wooden flooring. all holes for mounting straps are already in floor...

You still looking for a 110 csw pro

Bang on shifty, Thankyou

Can anyone help Bought a valeo clutch but does not say which face of clutch plate goes against the flywheel, so is it sticky out bit, or flat bit against the flywheel.Already took out old clutch but forgot to check what was what Thanks stuart

Hi Guys, need some help decided to change my td5 clutch, found out gearbox had problems so sent away to get recon'd only problem is that i forgot which clutch plate went, no markings on valeo clutch, so the question is Does the sticky out bit of the clutch plate go to engine or gearbox end. Main...

all bumpers are the same

Any 5 pin relay will do the job, if you do not use a relay you do not get both lights on at the 1 time when highbeam selected

no fuse required, but need relay for both lights to come on at once