Hi, yesterday cd changer decided not to play ball,just kept saying 'No Disc'. Tried reloading and it says cd check but then 'No Disc'. Discs are proper cds ( not copies ) and in the right way.After uncoupling unit a few times it loaded correctly and played as normal. Today back to 'No Disc' .It...

Correct my choice, would rather buy a lotto ticket for £34 than £1000 for one ( compressor).Bloke has had success on 2 freelanders this year.And by the way i used radweld on my mk1 Escort in the Eighties and that saved me £80 then !!:cool:

Watch what you say Craig, you may upset the petrolheads again !! Fitted a powerbox to my DHSE and it flies.;)

HI, checked the lead that Wills mentioned and all seemed ok so phoned up the bloke who regassed the system ( local ) and he said he would be with me in 5 mins. 5 mins later and there he was !.He said his normal thoughts would be a leaking condensor ( he reckons very common fault ) but when he...

Cheers Wills, will have a gander tomorrow.Do you know if the compressor would need to be running when i had it regassed to blow that lovely cold air or would it have been a case of new pressurised gas being enough to blow like that for a couple of weeks ? I have never heard anything ' click ' or...

Hi, yes agree but shouldn't i hear the compressor clicking in/out ?

Hi, had air con re-gassed 6 weeks ago and it blew chilled.I have had it on this week and noticed now that it is just cool !!.The system was empty when the mech did it but he said it pressure tested ok with no leaks.I have read a few threads on here and had the wife press the aircon off button a...

Wills, did you get any joy with Ashcrofts or are you still stuck with the problematic gearbox ?.No one has yet answered as to if the fault is affecting 4.0lt petrols as well as our DHSEs

Rav, the sons got my digi in france at the moment but when you pick the bonnet up the filter is to the right of the engine sitting high up with a couple of connecter blocks on it, yours will only fit one off those .:o

The 2 connectors on the left look like they fit on the top of the diesel filter unit. My box only had one wire and i had to remove the plug and solder the wire to a specific one in the plug, it looks like yours is more advanced and is just a case of swapping them over.:)

Hi ,i fitted a STEINBAUER power box 2 months ago to my 2000 dhse and it has made it a real drivers car plus gives me an extra 3/4 mph. There are only 2 connections, one to the screw connecter at the back of the injection pump, and then a single wire soldered to a wire at the top of the diesel...

To anyone who wants to fit a factory dog guard to a P38,its easy !!.Thanks to 'MUDFLAPS' pictures i did mine today in 20mins.Dont look under the outside roof rail flaps and dont drill any holes from the outside !. Cut the headlining with a sharp stanley knife as shown in the photos and you will...

Agree with both the replies, my 2000DHSE Auto did 18.4 around town until i fitted a superchip, i now get 22.4 around town and on a decent ( 330mls ) mixed run average 29 8mph

Wills, thanks for the excellent response,it does look an expensive bit of kit but looking at the drawing the 2 shift control solenoid valves sound incriminating dont they.My DHSE doesn't 'bang' into first/second but it is a bit off putting and not the silky ride it should be. Once again cheers...

Brilliant MUDFLAP, wish all people gave information as freely and politely as you forum !!:D

MUDFLAP, Would be a great help and do you know anything about these 'rivnuts' i read about . Cheers :D ONYX

Terv,have seen your earlier thread with the photo of the internal bracket fitted to headlining.As you say they look as tho they grow out of the roof but holding them im my hand the bolt holes go about a further 12 mm above what you can see, so defo a bit of cutting i think. Also there are 4...

'Terv', can see the dimples, do you have to cut the headlining ? Cheers for being patient but dont want to have big holes if i dont need to !

Cheers for that, that is exactly what i read from an earlier thread, but do you have to drill through the headlining to fit the holding bolts ?.:confused:

Hi, anyone fitted a landrover dog guard.I have read on here it has something to do with the rear roof rail slides.I have now got the brackets that fit to the headlining somewhere and the guard slides into these i believe. Cheers:D