Hi Sorry I have been away from the forum for two years!! Yesterday I changed all four springs on my 1986 RR classic to standard springs, from a Britpart 2" lift. The suspension is now sitting 10mm lower on the offside rear than the other three corners. What is strange is that with the 2"...

Many thanks, I will try asap with the live feed. Also will investigate the relay to see if it is faulty.

Help, I am just about to buy a gallon of petrol and a box of matches! My 86 3.5 EFI will not start or run on petrol, it will on gas. Have changed the fuel pump as it had a faulty wire inside, but have since found there is no feed to the pump or injectors (not clicking). The pump relay is...

Hi, new to the LZ. Can anyone advise me of the standard ride height for my 1986 Classic 3.5? ie the measurement from the wheel centre to the wheel arch. I have recently fitted a 2" lift to the car and it is not sitting level on the offside rear, the three other corners are fine. Thanks

I recently had the same issue with my 86 classic 3.5. Having done all the diagnositc checks on the ECU, water temp sensor, air flow meter ect. I changed the ignition module on the side of the distrbutor. Now ticks over and runs like new!

For safety disconnect the battery. I found it an easy job having done it on the driveway last year, so the rear cross member could be welded.