Ive tried,it wont go any further towards 11.

Yes i have a timing kit. I tried doing what he did in the video but im sure its meant to be in the 11 o clock position not 12 And it is as far o er as it will go. Im going to remove the cover and check again.

Come to drive this morning and it wont even start now. Ive got the flywheel locked and its lined up with the arrow on the front but the inj pump in now in the 12 o clock position not 11 but the pin goes in freely.

https://www.youtube.com/watch?v=zKnK0kJ1N-o Ill try this tomorrow.

I followed the workshop manual exactly but it runs like ****.Its like driving with the brakes on and a **** load of smoke. I took the front cover off to check it all and it all looked good. The only problem i had (if it is a problem) was that the locking pin that came with the kit (9mm) would...

I found out the hard way lol,ordered two of each.

Landrover Discovery 1 - Side Exit Exhaust Stainless Steel Off Road Use Brand New | eBay

If you have to take it out again i would use the engine crane like this guy did. http://www.northwest4x4.co.uk/forum/userpix/606_DSC01012_1.jpg I just used a strap around a piece of wood resting over the hole,once you take the gearbox mounts off ( again use some wood from the floor under the...

d2 seats in a d1 has been done before but its not a straight swap,a lot of fabrication need to be done as they d2 seats are anchored in the floor. Go on google pics and you will see the difference :)

No idea what its worth,comes as seen with two hella spot lights which will need bolting back on. (Comes with the bolts) £100 located in blackpool,open to offers. pics on the ebay page. Land rover discovery 1 Safari front bumber with Hella spot lights | eBay

No idea what its worth,comes as seen with two hella spot lights which will need bolting back on. (Comes with the bolts) £100 located in blackpool,open to offers. Its not lettng me upload pics on my phone so ill upload it when i get home. Same as this one...

Awesome!

I need a safari badge from the drivers side front wing :)

Ive got a safari :) Do you know the guy breaking one?

No spacers and the slave was the same. What lever are you talking about? Didn't change the rod.

I keep telling myself it cant be something so simple as a decent bleed because the easybleed kit is really good,i speant ages making sure no air was coming out. If you watched the vid i posted would you say the fork should be that loose?

Yeah its been doing that the whole time.

Bypassed the damper,might be slightly better but still crunchy and reverse is a bitch.

I bled the system.

The master was leaking,changed it and its better than it was but its still not right.