1. NRS91

    King Cab Conversion Advice ??

    ahh my mate has come up with the tool! Joggler / Flanger with Hole Punch | Frost Auto Restoration Techniques
  2. NRS91

    King Cab Conversion Advice ??

    the sides of the green one are how i would do it but the roof is rough as hell... need to think of the technical term for making a flat piece of metal dip down to a lower level... then i can overlap seal and rivet the two roofs lol
  3. NRS91

    King Cab Conversion Advice ??

    aye they look smart... the truck cab based ones are what im going for tbh the main thing i cant remember is the tool required to shape the leading edge of the truck cab roof to overlap the front section of van roof with the rear truck cab section hard to explain but i hope you know what i...
  4. NRS91

    King Cab Conversion Advice ??

    no arguements on looks or purpose... im an arthritic fat bastard... after driving a P38a and then a Disco2 as daily drivers ive come to appreciate room... hence king cab and flat floor mods are on the way. :D i like the truck cab for the look and visibility... im just after advice on...
  5. NRS91

    King Cab Conversion Advice ??

    Hello Lads and ladys, A while back someone gave me some advice on how to make my king cab from a van roof and a truck cab including measurements etc... now for the life of me i cant remember who or where it was and an hour of searching i cant find the post... sooo back to square one... who...
  6. NRS91

    6.3 chevy-engined monster

    good news! glad to hear a successful pass!
  7. NRS91

    D2 TD5 Door wind noise

    thanks... think ill be removing a door card tomoz then lol
  8. NRS91

    D2 TD5 Door wind noise

    ah just read through that... that isnt the issue solved... its like the door top is loose... the mirror vibrates and the top seems to move away at speeds above 50mph. door seal aint the problem
  9. NRS91

    D2 TD5 Door wind noise

    ideal thanks! couldnt find that in my google search so hopefully resurrecting this will help others
  10. NRS91

    D2 TD5 Door wind noise

    I have the same issue with my passenger side door top anybody found a solution?
  11. NRS91

    Doing the impossble? Cummins 6BT into a 90!

    must be all gay ;)
  12. NRS91

    Doing the impossble? Cummins 6BT into a 90!

    haha they are nice... but if you build one please get plenty of pics and vids :D shame there wernt more of ya 6x6 tbh lol
  13. NRS91

    Doing the impossble? Cummins 6BT into a 90!

    "The Big Purple One" 12v Cummins 6BT Land Rover 90 GoPro Run Out - YouTube Latest vid ;)
  14. NRS91

    anyone dundid a wide body defender?

    haha speak of the devil n all that lol ill be king cab but standard width with wide wings and wide tray to cover the wheels now whos this then?
  15. NRS91

    anyone dundid a wide body defender?

    i will start when im back from aus ayresy! and its guna be more like LOFTY than a 1 ton
  16. NRS91

    Extended pick up cab

    unless those four stone are me legs and right arm i doubt itl make much odds lol Redhand thanks for a sensible prompt reply... seems a good way to go about it just the swage might be an issue. will have to read that a couple more times and let it all digest though haha
  17. NRS91

    Extended pick up cab

    i know this is a google based thread resurrection... but better than starting a new thread on a topic thats well beaten to get told to use the search function... anyway... any pics of how the roof has been done? and a close up from the outside? what kills these conversions for me is the...
  18. NRS91

    Harper Adams 4x4 Videos

    Engineers with Vetnurses Agris with REALMys its the harper way haha
  19. NRS91

    Harper Adams 4x4 Videos

    hmm might of been the panther... it has CTIS on it though so every time ive seen it theyve been pumped up for sure Aryresy... definately a good night out eh?
  20. NRS91

    Harper Adams 4x4 Videos

    what flat on what APC? Harper is a proper University... the government says so and everythin :P and Student garage got shut down due to arseholes... were trying to get it goin again