Came across this while browsing Duralac Anti Corrosive Compound PB DL-0115 Llewellyn Ryland But I guess silicon and wd40 as suggested would do just as good a job - cheaper too!

Thanks for all the info everyone :)

Cheers for that - found the lower drain holes in the main chassis -cant beleive I missed them:doh: If I do feel the need to drill more holes I assume I have to be careful of wireing that may be in the chassis? ----------------------------------------------------------- lol philvy.... mines...

Hi all, Q: Are there suppossed to be drain holes in the chassis on the underside of teh chassis itself? The low points of the chassis are the midsections between the wheels but no drain holes underneath? There is a 20mm or therabouts hole in the side of the chassis in the mid section but other...

Hi bustersbus - you've got an excellent set of help files there (bookmarked :)) a good reference when I change the PAS pump - thanks very much! ntc8287 pump looks to be the same as mine on a 1991 110 hardtop except yours looks better

Just this minute found this thread re: 200tdi PAS pumps for anyone who needs more info. PAS Pump Clarification - LR4x4 - The Land Rover Forum

Mine looks more like this one: part no: NTC8287 NTC8287 200TDI POWER STEERING PUMP ASSEMBLY | Defender 1985>: Major Units | shop | www.lrseries.com | L. R. Series it also says it will fit the 2.5 NA Diesel, 2.5 Turbo diesel engines! This one that has Part No: [B]NTC9070 Steering Pump for Land...

Hi all, Just fishing for info here - been searching and calling up scrappy for an new (used) power steering pump - one has one but not for a few days (probably will take longer !) Anyway - the pumps seems fine but the pully shaft bearings have gone - they are clearly visible from underneath...

I cant think of a more robust, practical & versatile vehicle! the more i use it the more i'll like it :D - wife can have the golf :)

Hi Langers - Ive got a friend who knows a bit more about landrovers than me and he said its about right and not to worry too much as everything is adjustable and replacable at not too much cost either - considering it was a 220 mile drive i was very comfortable - I like the driving position...

Hi all, Just bought a 1991 110 200tdi hardtop with 180k on the clock. the engine seems good and doesn't smoke, starts well and pulls well. The chassis is very good and clean - just some surface rust but minimal the outriggers have some surface rust but appear to be ok. its had a new X member...

Thanks for all your replies - has cleared my mind somewhat :) If any you have more info on this or any pictures it, links etc - would be interesting to see!

The floor plates in the rear of the CSW? how many peices are there from the back of the wagon to the front drivers seat box? - and would the outriggers (I assume maybe wrongly, they're for the second door posts) - do they get in the way of anything or need to be cut and ground off? the more I...

Do you mean in terms of the extra expense of getting the other bits to do the swap? your probably right about that! & the time it takes for the bits to become available at right price. I agree with you that its better to get what you want in the first place but Im still curious about the ease/...

Hi all, Im still looking for a defender 110 hardtop or pickup and I have a few questions that after searching I cant find the answer to yet - specific to the defender 110. Ive read threads that talk about converting from a hardtop 110 (3door) to a csw 110 (5 door) and the complexity involved...

Thanks for the welcome all :)

lol Im getting to like this dementia ! Wife always thought I was demented, for that matter so does my psychiatrist :)

Protest site if anyones interested! Low Emission Zone | LEZ Protest | Low Emission Zone Information :) Personally I get the feeling that this will be rolled out nationwide - lot of small businesses are going to go under as a result.

Hi to everyone, not got a landrover yet but looking. I want a defender 110 hardtop 200tdi ideally for under 2500 & have just missed a few on ebay. Im going to the LRO show (peterborough) this weekend - hope to spot something there! Anyway - been reading through this forum for a while now -great...