Is that for def ? Just don't want to screw the clutch seeing as its new in case its a faulty past

No i didn't change the master cylinder.i only did the clutch because the box was out to have the bearing replaced

Hi all just had a new clutch and bearing fitted as my old bearing was completely screwed. Now the bite is on the floor and it Will barely go in gear . Its been bled a few times but still the same. Any ideas as its gonna cost a bomb to take it all out again. Thanks as always

Hi all I have a 5 dr 2003 TD4 witht he side rails built in and bough myself the bars to go accross and make a full rack. Whats the max weight i can take on the roof without any damage? cheers

Cheers mate.

Pity your on the wrong side of the pond .id love em :(

What colour wire is for the reverse light and where is it easiest to get to? Thanks for your help

Hi all I'm looking to wire in an aftermarket reverse sensor on my mothers 205 TD4 manual and am looking for a wire to have ot switch on only when reverse is engaged.Was thinking the reverse light wire and onto an open/close relay. Can anyone point me in the easiest path for that wire or is...

i think the injectors are ok.i replaced the 4 with refurbed ones about 6 months ago.will try it though

its a diesel.all i hear from it on idle is it bouncing up and down a bit.its not the handling thats affected its just massive vibrations and when i dip the clutch its gone.i dunno is it the connector for the fuel rail?

thing is it doesnt lose power at all when i get the vibration.wouldnt a misfire kill the power?it still accelerates away and holds speed even up hill

really?its that bad?any idea whats causing it?where did this come from all of a sudden?

is it bad to drive with if its intermittent?

it happened a few weeks ago for a few secs, went away and it came back for the last 3 miles of y journey.went out for a spin and its gone again.its a 2003 td4.it happens in high gear and as soon as i press the clutch it goes,i leave up the clutch it comes back.i'v egot a lumpy idle too...

Hi all Noticed today a vibration from the front.It goes away as soon as i hit the clutch and feels like a really bad wheel wobble. Any ideas? Thanks folks

Hi all Just wondering if anyone had or know where i can get the dimensions of the boot in a 5 door freelander 1 when the seats are folded forward? thanks

thanks gents.i did do a search but was not sure if the bmw one would fit and then ladrover told me you had to buy the full unit and couldnt just change the filter

and will that just fit in the landrover housing?

isnt the bmw one a plastic element?i thought the filter element was different.thats if you were going bmw route then you had to get the bmw filter assembly too?

Hi all I want to change my crank breather filter and landrover are telling me i have to chaneg the entire unit and are looking for 70 quid for the part. Can i not just replace the element with this Land Rover Freelander TD4 Crank Case Breather Filter on eBay (end time 24-Mar-11 09:28:53 GMT)...