Freely available from your local friendly Land Rover dealer. I'm sure you could get the same spec from elsewhere, but its well documented here that its a special blend. Good Luck :)

Well the brake lights won't come on when you brake. So I would say its pretty important to get it sorted. The parts cost about £25 ~ £30 and its a doddle to fix, honest :)

Its the footbrake switch - see the sticky post above re: The Three Amigos

So it feels like you're in the wrong gear? Bit of throttle and it changes down? I've had this problem, tho not as bad as you describe. I had the auto gearbox oil replaced and it seems to have cured the problem for me. Remember to buy the oil recommended by Land Rover. Hope this helps.

Just for reference, here's a piccy.

Thanks for this guys. You just sparked an idea in my head. Managed to find a foam lined ABS box, a cut out here, a cut out there, all sorted. Cheers

Mornin' All, I've installed a RonBox 2A recently and I'm not too happy about where I have positioned it (stuck on top of the ECU compartment). For those that have installed one before, where did you stick yours? I thought about modding the ECU compartment but these things are sealed...

Fitted RonBox 2A. Very very pleased indeed. I have a transformed Freelander. I suspect the new MAF has a lot to do with it, but oooh that extra power. :D

I've seen that before.. I used to own a C class Mercedes CDI. The engines were notorious for 'The Black Death' which was caused by a leaking injector seal. The stuff sets as hard as glass, so needs to be chipped away. The injector seal costs pennies. On the Merc, the seals are replaced and...

Nice one Andy, I can only assume that the same issue befell my VCU. Coz when Bell put a new replacement VCU in with my propshaft the symptoms never re-occurred. Austen and Ken really know their stuff and their good lads too. Very pleased you got your car sorted Andy. Cheers, P

Fitted RonBox 2a this morning into my TD4 (with switch and new MAF). Bl**dy hell what a difference. Just another little tip for routing the switch cable into the engine bay. From the engine bay, looking at the break servo. To the left there is a blanking grommet which appears internally...

Andy, How did you get on at Bell Engineering? Did they solve the problem?

I have to admit I am gobsmacked that such an important piece of structure is made of such p*ss poor material. I know in terms of manufacturing and assembly line installation its easier to fit a single part with four bolts that two parts with eight bolts, but Land Rover scored a humdinger with...

New spanking exhaust system front to back and new fuel tank cradle fitted.

Well the new cradle is on. Along with a new exhaust that was rusted to f*** as well. Replacing the cradle is not a job for the feint hearted so unless you have a super duper ramp and multiple jacks 'n' stuff, get a friendly garage to do it for you. My local lads did it and charged me two...

Many Thanks Hippo :)

Whilst I was fiddling around under the bonnet today, I noticed a pipe sticking out of the top of the gearbox. Nothing connected to it. Is this just a breather pipe of some sort or should there be a pipe connected to this?

Well if you want some help I'd suggest a good start is not calling me a T*at.

Oooh ! Look what just showed up! :D

Just a quick update... Famous Four do have these cradles in stock at the moment, but they're not cheap by any means.