Sorry just found pic, will post late but yes looks black

Ahh, plastic for sure, I think it was white. The carb is 2010.

Hi Guys - need some views on this. Currently having a problem running rich (soot black plugs) finally leading to misfire caused by plugs too sooted up on a weber 34ich Facts so far. Mixture screw does nothing (or appears to do nothing) Will run (just) with 2 turns on idle screw - note mixture...

Basically a type test for importation, as was made before EU a bit complicated to convince them on the tech stuff ie what size wheels, tyres, brakes etc etc etc will report back

Thanks alot, for Info I had The paint made up to The Landover Masai red paint code, also bought some of the same red from paddocks for inside etc...very different color.....

Thanks, I had luck as managed to do 40 hours a week at least!!!!!

In the middle of March I started the renovation of our Series 2a (1968) and tried to focus of the big issues surrounding chassis (which is ok) drive train and suspension. Jobs done Swivels Front Half shaft Bearings Handbrake seal New Springs all round New dampers New Brake cylinders (rear)...

It is a bit unclear but when I get the angle grinder our I am sure all will be explained!!

Will be interesting to see!!

Hi, As some of you will know I am renovating a Series 2a overseas, and have started with the axles. All has gone well until I took the front springs off and it appears that the chassis bush has been welded in!! I assume the chassis was damaged or a bush was too small but any ideas why it is...

Marks are FAG 500437 M SF - really nice piece of kit!

Better pic

New and Old, Old made by FAG and 100% better not sure whether to attempt to fit the new plastic ones or not! Paddock said no reported problems!

Thanks I think they are too, not sure what the plastic ring is for!

Hi, Does anyone know if there is a right or wrong way to put in the half shaft bearings into the swivel housing. Just rebuilding mine and could only order a Britpart bearing and it looks different on one side with a sort of plastic retaining ring. Pics attached of how I put it in. Very...

Thanks

Currently using Haynes manual and simply no mention! May need to upgrade

Thanks everyone

Need to check I think so, I guess this nut must preload the half shaft bearings - or am I missing something - thanks by the way