Thanks

No one????

No one?????

Hi, i have just noticed a fuel leak from my rear fuel lines on my RRC 3.9efi. The lines are pretty corroded and need relacement asap. I would do this myself but i am buggering off to West Africa tomorrow for a month. I will need to get the local 4x4 garage to replace them for me as i dont...

Hi, i have just noticed a fuel leak from my rear fuel lines on my RRC 3.9efi. The lines are pretty corroded and need relacement asap. I would do this myself but i am buggering off to West Africa tomorrow for a month. I will need to get the local 4x4 garage to replace them for me as i...

Addendum (i'll go soon i promise) I forgot to say.....right at the beginning you will need to depressurise the fuel rail. The fuel rail can hold up to 2.5bar of pressure so if you forget to depressurise it you are going to get sprayed (dangerous)!!!! To depressurise it get under the driver...

You can them make up your own T-piece with a connector kit (halfords) You can either get a connector that the insert will fit into and glue it or heat up the insert until really hot and push into a slightly smaller diameter connector for a really snug fit. Sorry but i got carried...

Plenum fitted. Again make the the mating faces are clean and apply hylomar blue to ensure an airtight seal. TOP TIP!! :D Above (in the blue rectangle) shows a pic of a T-Piece. This T-piece is part of the crankcase breather hose. It has a special reduction piece in it (see following...

So here we go again. The stealers have still not come up with the goods so i went online to rimmerbros.co.uk and ordered the o rings. They were here 24 hrs later! hows that for service? Brilliant for parts and second to none for fast delivery. :D:D Anyhoo back to the job in hand! So...

Again no update, the Stealers ordered in the wrong o rings, even after I showed them which part I needed and giving them the part number. " oh I thought you needed these ones " Did not have me smiling :brick:

Sorry, no more updates till Wednesday I can't get any new injector o rings until then!

Thanx! I could'nt find a post like this before I started so I thought it only right to post it with pics so that the next numpty like me who wants to save a few quid might attempt it themselves. Anyhoo i'll be posting more as I bring the old girl up to standard. :D:D:D:D:D:D:D

Yes but she was on nightshift, how do you think i got away with the livingroom spraybooth! :D:D:D

Before. After. Livingroom spray booth. So getting there slowly but surely!! Might have finished it today it if wasnt for those pesky o rings!

So now in process of putting it back together. Cleaned all mating faces. De-greased everything. Spit n polish. Taa-daa!! Future note to all, the injectors are a real bitch to get back in. Use 3 in one oil to re seat them. At first i used a lighter grade oil but it didnt cut the...

Apparently according to the listing it's a 4cc engine. It must be powered by a mouse.

Thanks Rasheed :D

HONDAÂ*LUQÂ*WESTMINSTERÂ*GREY Aerosol Paint 400ML on eBay (end time 23-Feb-11 21:24:51 GMT) These guys will mix up any colour you want. Although £20 a can!!!!!!!!!!! :doh::doh::doh::doh:

So today i carried on and in such cleaned all the crap off the plenum (filthy), the ram housing (even Filthier) and the inlet manifold (as dirty as my woman..............really filthy). After degreasing i took them down to the garage to pressure wash them, most of the water ended up on myself...

Consider it done. The commentary is voiced by David Attenborough :D