Hi, Ive just replaced my valley gasket with a composite one as the tin one i installed previously started leaking coolant (some bolts which i had torqued correctly had come loose). When i start her now she sounds like a bag of spanners. The engine vibrates visibly and she hunts...

Looks like im going to have to do the lot again! Ah well it was fun the first time, might as well do it again! Lol! Prob do the head gaskets too just for ****s n giggles.

Took off plenum and trumpet housing to find coolant on valley gasket :( Going to tighten up the manifold bolts ( hoping i can get to them without removing fuel rail) and hope that they just came loose. Otherwise...........................

@Kev, had the stepper out and gave it a good clean. I'll try re tightening the manifold bolts under the plenum.

@ Reekie I just used a Haynes and some pages from inter web. It's not massively difficult. You just need to label EVERYTHING take photos every step of the way ( very useful ) and put everything you take off into little labeled ziplock bags. Oh yeah and when you get ****ed off just stop n go and...

I had a hard to start problem a while back which was the intake manifold gasket. Although she was really really hard to start. I replaced this myself ( having never done it before) was a really rewarding job. I posted how to do it on here with pictures. So I don't think it'll be that well I...

Shes on lpg too. ( which has only recently stopped working ) ! When i try to change over i can hear the lpg solenoid clicking and the injectors clicking for about a second before it goes back onto petrol. Which, is costing me a smsll fortune!

Some bastard reversed into my RRC and smashed up my wing! (oh and drove off) i wish i had been there! If anyone knows where i might be able to get a wing for passenger side in trocadero red for much cheapness i would be much obliged. Cheers, Stu

Oh aye and the fuel guage takes AGEs to show what its got in it. Sometimes when i fill the tank it wont show anything for a whie then will everso slowly go to thre quarters full.

Hi my beloved RRC has developed a few problems but i shall start with the first only. The old girl never fires up first time anymore. I have to turn her over a few times. Then turn ignition off and try again only then will she start and when she does start the engine will sometimes surge...

ttt

Wanted early range rover wooden door tops/trims these are the bits that sit on top of the door cards. i need the fronts and the rears if anybody could help? Thanks.Stu.

Check timing? If loosing coolant hold hand at exhaust and check for moisture on hand. My RRC 92 had a buggered inlet manifold gasket, would not start when cold due to taking in air/coolant from it. Changed gasket and she stared 1st time. Dont use any fancy plugs, i spent a small fortune on...

Hmppppppppppppppphhhhhhhhhh. Ok new one, maybe same one. Engine cut out dead, pulled into side of road. Wiggled all wires again nothing. Car would turn over fine but just not start. Called AA, got bored. Went over all wiring in engine bay. Found that the wire to from the MAF was almost parted...

Ok update, wiggled every wire under bonnet to see if some vibration on bust wires was causing problem.......nada. Had a wiggle under drivers seat......voila engine cuts out orange warning light comes on. Restart engine and do it again........engine cuts outs immediately. Restart engine and...

Engine is 3.9 efi, problem happens on lpg (multipoint) and on petrol. Happened 3 times today so becoming much more frequent. Not happy. Anyone near inverness got a code reader i could borrow n plug in?

Ahh just the ticket! The US versions had the obd display but not apparently the uk versions. I have the software for the eas on my laptop (very good) Cheers Zen.

But the dealers can plug the ecu into a computer to read codes so while is doesnt have a dedicated "OBD" it has the ecu which stores codes which can be read. I wnat to know if the software is available to run on a home laptop.

Some bastard reversed into my RRC and smashed up my wing! (oh and drove off) i wish i had been there! If anyone knows where i might be able to get a wing in trocadero red for much cheapness i would be much obliged. Cheers, Stu

Anyone know of any Software that can be run on a laptop for checking fault codes on a 92 RRC. I dont have one of those display thingumys i keep reading about. Cheers Stu.