Any one

First time uploading photo. sorry for the mess. I circled the hose which I tightened. I loosened it and fired once and then now it is not doing anything. whenever I turn the ignition on, there is hissing sound coming for about 60 seconds on this hose (may be somewhere near to the hose) and...

:) Just realised that.. it is TD4 Freelander. also updated the original post.. Thanks for the reply :)

hi TD4 - Freelander 2006 my car is not starting up. The battery is good. Bit of history 1. Always had the trouble filling up the car as the pump keep cutting off every 1/2 litre and takes ages to fill the tank up 2. Had the turbo cooler hose exploded and replaced it 3. The hose became loose...

I have this juttering noise back again.. Engine make "doub doub" noise and looses power and it picks up again.. I cleaned the EGR valve once. it is not helping.. Any advice? thanks in advance..

I have cleaned the EGR valve by taking it off and the other hoses. There is bit of judder i thought this should solve. I am not getting the judder now but not sure whether it is fixed yet. so I am monitoring for now!!

Thank you :) I bought the hose. But the problem I have is I am not able to reach the side connected to radiator. I can touch it with my fingers but tools are not fitting there as there other tubes blocking .. Not sure what is the right tool I tried with socket 7mm and also with angler screw...

Thanks yes.. I did hear the hissing noise :) and it was not pleasant!

After doing bit more reading and research, the hose that is damaged is inter cooler hose.. Just wondering how easy it is to replace? and also would this cause the loss of power? Thanks

Thank you. I managed to reach home last night driving in 40 mph in A12 .. I will change the tube today..

I got the same problem , found the tube next to the air intake is torn open. I came to Ipswich to pick my son now I put a tape on the tube from 99p shop as it was nearby Not sure how long it holds. Needs to see in A12 on my way back home . Mine has done 58k Thanks

lol Thanks I will pass then :)

IS it possible/easy to convert the manual seats to electric in Freelander 1? Anyone attempted before? thanks

I tried with knife not coming off. May be I need to put more pressure.. I don't want to make marks on the sides .. Will try this evening when the rain stops !

Thanks .. Will try.. I presume I can just pull that out..

I also need this.. Can't find a new one.. The existing one looks worn out in mine