Got a few nice photos from Billing 😁

Not many updates on the car front. Been very busy with well life 😅 Sadly wont be going to Marquenterre this year - Its almost as if I can never go with a kitted car with a VNT its been 5, maybe 6 years everytime somethings gone wrong! However as we where all booked off anyway decided to go to...

VNTs are great. Mines at full boost (2.5bar) around 1700rpm So plenty of power on the lower end as well however mines all done by Empire Tuning. I wouldnt recommend anyone else.

Dynamic load driving is 150kg. Static load is high based off the rateing of the roof bars

Press the left button on the fob that turns the immo off, before you try and start it it If the steering wheel is locked in position you have to wiggle the key while turning the wheel to disengage

Not the usual thread! My AC does work, has a larger condenser and a 15" Spal fan, which also does work - When tested with the Nanocom pulse AC Fan function. However ive never had it come on, as I understand it its thermostat controlled. Is there anyway to lower the temp it kicks in at?

Nigel hand delivered my diff today! Old one out and new one in! Just over an hour, almost as if ive done this many times before 🤣🤣 Dramatic improvement to road manners. Much better cornering, much better traction and its balanced out the front ATB so no more oversteer! Wired in my roof...

Xcess4x4 Ultrabuild Rear ATB! All built and ready to go! Nigel is nothing short of exceptional. He was concerned about a slight click and not 100% engagement on two teeth. So rebuilt it again with a brand new new Dana CW&P... Talk about service!

Honestly no idea! I just fill with my pump till it drips out but i strongly suspect its about 2L as opposed to 1.7L Surprisingly not! I only did the front as I needed a new axle anyway. So the rear will just have a wrap around diff guard like everyone else 😅😅 Just did a 60mile drive...

Ohhhh thats really annoyed me! In my tired state didnt notice the spring rotated! Ahh well its tight af with a 10.9 HT bolt... 🫠

Well that was an exhausting day! So much for my mates 5 hour estimate 🤣 Took about 10 hours including a tidy up! But all done. Nothing was reused everything is new, or was recently new. Wasnt too bad getting everything off as it had all come off before... New and old. Decided to fit the...

EP90 isnt as simple as fill it with EP90. Ideally any previous grease has to be cleaned off/drained. Got to be 100% certain that your swivel balls are in excellent condition, swivels seals excellent condition, flanges need RTV. Can also remove the inner seal on the stub axle to allow EP90 to...

One shot is the grease to use... even comes in a handy container to pour it straight in

Eventful drive home! Car went a bit "squiffy" pulled over did the normal checks. Even jacked it up and checked wheel bearings etc.. Zero play. Couldnt see anything at all.... So I thought id drive back to the yard for good measure. Drove through the gates and the wheel bearing collapsed! So...

Cheers :) PM sent.

Been chasing down my random mislock issue since i fitted the cage. First thought i must have nicked a cable somewhere... Nope, turns out just plugged the side repeater into the horn 😅 Just swapping that side repeater has solved all the isssues! Id even bought copper bolts to increase...

Driven around a fair bit now. Got a very annoying plastic rattle from the front, seems incidental. Mislock, easily solved probably nicked or dislodged a door switch 110 certainly feels more rigid, I can feel less flex in the body/chassis when cornering. Theres a touch more body roll than...

Cleaned up and left as bare stainless on another 110!

They look good nicely painted! The trike looks justbas awesome!

Cheers guys 😁 Will gets some more pics when its cleaned again!