Not fixed down yet but will be tomorrow! Dynamat inside, 2mm foam, followed by carpet inside. Should keep the contents nice and quiet! Started drawing up the side cubby for the hi-lift but the pressbrake decide to kill it self! So thats on hold for now. Overall pretty happy! Learned how to...

Made some good progress on the drawers after work today. In spite of the violent heat. All works as it should after a couple tweaks to the frame. Just got to fit it in the 110, take some measurements for the side locker, draw that up. Going to dynamat, foam and carpet it. Cant have the noise...

Back fo Salisbury again for a days off roading and a catch up. Was a great weekend. Got stuck a few times because it seems not many of the lanes or the plains have been driven in quite a while! So all the thick clay had settled. Very impressed by the Jeep but suppose you would be for £40k...

Send some dims i can see what i cN do!

Ohh on the D2s? I may have one in the garagr gbf

What is it 😂

Off work today so spent the day making my rock sliders. Went extremely well, design was pretty much spot on. Just had to rework the bulkhead bolt bracket but that was easy. 4mm mild folded where possible. 4mm gussets throughout for extreme strength. Mounts to the bulkhead bolt & rear...

Nearrrrlly there! Everything fits, everything works well, super smooth action. Just waiting for the latch to arrive so I can cut the front plate and the lower locking plate. Main frames 90% done just need to fit the upper bearings. Drawers very close well hence the half paint 😅

Got carried away and made the frame for the drawer system as well 😄 Pretty heavy duty, all 3mm mild as thats what I had. All within about 2mm, not perfect but it will do. Now the frames together I can design the actual drawer! Luckily got an old sheet on 1.6mm which is never going to be...

Designed, cut and bent! All tacked up ready for a test fit. Annoyingly will have to remove my sills and current steps to check fitment, alignment and brackets. Will have 4mm gussets throughout to add strength.

Oooo thats an idea! Ill have a think tomorrow. No compressor but easy to add, air rams would be rapid deployment 😂

I have already. They all state "not to be used off road" "not to be used a bash bars" etc.... Already looking into jeep/G Wagon styl that retract underneath out of harms way. Shockingly not much from ole AliEX will just need proper mounts fabricating and waterproofing the electrics. Plus...

🤣🤣 Honestly not sure I can do a set for a 90 as I havnt got one to measure and check against! Though im sure I can in the future.... Wannna get these done first, thinking about incorporating a lower detachable maybe foldable step to help the mrs...

Been looking around for some rocksliders as the current side steps where always going to be temporary. Decided to move away from the usual tubular design and go for a more boxy look, however they tend to be rather expensive! Then I remember I have a steel fab workshop 😅 Only a 2D flat...

Had a few spare moments today, quick wash and polish. It cleans up very well for 21 years old, definitely not perfect and in desperate need of a proper cut and machine polish but it will do! Especially as im going to Salisbury next weekend 😂

Appreciate the links but I know what ratios I want. 33" tyres + higher 5th and a 1.3 make for an exceptional drive in a tuned TD5. And very good mpg

1.3 was never standard i know thats a longshot! Its not for me, for a mate who has a 1.6 but its a little noisy wants a 1.2 or 1.4!

1.2/1.4 ideally 1.3

After a a transferbox box with difflock Close to sittingbourne if possible

Finally managed to get another set of seat runners for dirt cheap for my rear seat project. Materials wont be alot sub £100 Just got to strip the runners off the old seats and fit them to my old front seats. Fix the heated seat connectors back on, because i stole them for my bucket seats...