1. bankz5152

    Td5 defender vibration

    Hard to say. It could be anything.. Is the vibration in the steering or over all?
  2. bankz5152

    Bankzs 110 CSW XS Build

    Well it hasnt gone well so far 😂 didnt even get to wales before my mates car decided to have a sticky injector so hes being towed.... Same car also has a a VERY noisy diff so im in West Wales getting a short nose rear diff 😅
  3. bankz5152

    Bankzs 110 CSW XS Build

    Off to Wales laning today! 😁😁😁
  4. bankz5152

    Bankzs 110 CSW XS Build

    Cheers! I was hopeing to have them interchangeable depending on what im doing! However i have thought of a quick bolt on modification to the frame that will allow the fridge to sit in the center! So will get to that at some point. Also just saw an end of line sale at VGS.... So may have...
  5. bankz5152

    Bankzs 110 CSW XS Build

    Tried the fridge in place of the cubby box, it doesnt fit ðŸ˜Ū‍ðŸ’ĻðŸ˜Ū‍ðŸ’Ļ about 20mm too large! You can kind of wedge it in but needs some more thought to work... So back in the boot for now, maybe revisit the slide out the door fridge or work out another way to fit in the middle!
  6. bankz5152

    Bankzs 110 CSW XS Build

    Cheers!! It was not easy... Extremely tight fit to reinstall and had to use 40mm long trim clips opposed to the standard 28mm they just couldnt hold it properly. Overall am pleased though. Off to Wales on Weds for a few days laning!
  7. bankz5152

    Bankzs 110 CSW XS Build

    Not the greatest pic but hard to actually photograph well.
  8. bankz5152

    Wanted Defender Drivers Side Wing 300tdi+

    Hey, Looking for a Defender drivers side wing, top and side with inner arch ideally. Condition and colour not really a bother. Ideally in the South.
  9. bankz5152

    Bankzs 110 CSW XS Build

    Yeah standard drive shaft, its just been zinc coated, as its out of the axle case. I know right!! Im already thinking, got a couple ideas but they arnt perfect but would work. Going to chat to my engineer friend to see what we come up with! The free wheeling hubs are from AVM, the auto locking...
  10. bankz5152

    Bankzs 110 CSW XS Build

    Something i have always wanted to try out. The X Eng lockable ARB. Fitting was pretty easy, only basic tools needed. Instructions are mediocre as youd expect. Very well thought out using mostly off the shelf LR parts - They also supply the p/n and no gate keeping which is lovely...
  11. bankz5152

    Bankzs 110 CSW XS Build

    Got my headliner back after being recovered with alcantara. Its so plushy and nice! ABSOLUTE BAST@RD to reinstall! Cage was easier Axle swap was easier Dare i say it swivel balls easier ðŸĪŠ Its still not in, because the fir tree clips are too short. In part because of my excessive...
  12. bankz5152

    Bankzs 110 CSW XS Build

    Cubby box in. Made some little quick detach brackets underneath, so can still fold flat with relative ease. Just needs a proper clean now! However recent passengers have already said how much better it is! So thats a win in my book. Plus a nice autumnal photo for you all My headliner is...
  13. bankz5152

    Remote Locking Freewheeling Hubs?

    I obviously cant leave anything standard and can often see a way to improve it... So bought the XEng unlockable rear anti rollbar which uses an AVM Series locking hub. Lovely design and will suit my needs perfectly. Got me thinking if I can make it work off a switch on the dash either...
  14. bankz5152

    For Sale Defender 110 Front Axle Case

    Removed from a 2003 Defender 110 on 145km Diff is good One swivel is fine. The other is pitted. Perfect for a rebuild! Collection only from BR6 ÂĢ250 for forum members.
  15. bankz5152

    For Sale Defender NAS Step Recovery Eye

    Defender NAS Step Recovery Eye. 15mm steel. Will need x4 M16 x 50mm 8.8 grade or similar to fit (plus nylocs/washers) ÂĢ40.00 Can post.
  16. bankz5152

    SOLD Defender 110 XS 60/40 Middle Row Seats

    Removed from a 2003 XS 110. Good conditon. Some minor damage to the rear of one of the seats. Collection from Crawley or Horsham Can post at cost. ÂĢ300.00
  17. bankz5152

    Bankzs 110 CSW XS Build

    Yup.. sits under the seats, did the same in the old 110 but made the mistake of using a 5kw which was HUGE this one is a true 2kw.
  18. bankz5152

    Bankzs 110 CSW XS Build

    Best day ever 🙄 Noticed the exhaust manifold gasket was blowing. On removal found it was split on cyl 1 blowing on 3, 4 & 😎 Changed the studs to longer ones from Gigglepin, well most... couldnt get 3 out and wasn't risking snapping them. So they stayed. Not tooo bad.... Also found then...
  19. bankz5152

    Bankzs 110 CSW XS Build

    Frames all painted, adjustments made. Beefed up two off the connections from M8 to M12 because it was easy to do. Just waiting for the clasp for the storage door. Ordered a MUD Stuff cubby box, slightly larger than the OEM one so should fit nicely in there. May get the lid trimmed to...
  20. bankz5152

    Bankzs 110 CSW XS Build

    Oh thats a good idea! Erm no one really more of an emergency short trip jump seat and always found it handy to have a flat space across the seats.