P plate 300tdi with 235k on the clock, still pretty strong too.

Oh, and do the back first. Its much easier and it's better to drive facing nose down than nose up.

:5biagree:

The hardest bit will be undoing the trailing arm/radius arm bolts. I did mine last January without changing the trailing arms/radius arms in two afternoons. IF you want to do it yourself, buy some decent penetrating (snigger) fluid (not WD40) and give all the bolts a really good soaking for a...

I have a stencil of the Metallica scary guy that I'm gonna put on mine at some point.

In your endo. :nothingtoadd:

Pretty sure exmoor trim do canvas seat covers for discos. Just google em.

:pop2:

The wider the audience the better as far as this is concerned. I try to avoid Brit part where possible anyway but that's a disgrace.

Found a pic on your build thread. Lift pump looks the same as a standard one. It shouldn't have failed after 6k miles but its less than 5 minute job to swap. I didn't even have to bleed my fuel system when I did mine.

Can you post a photo of the drivers side of your engine? Seeing as how the TGV is a beefed up 300tdi I'd expect the lift pump to be the same.

Very much a case of go away and stop making a fuss before anybody notices. Have you shared this on LR4x4 as well?

Where is that air box from Gib?

Dunno if you have noticed but it looks like you have had your steering wheel pinched. Have you visited Liverpool recently? :D

1996 300tdi. Rotten o/s front inner wing Rotten n/s front inner wing Rotten o/s A post bottom Rotten o/s B post bottom Rotten o/s rear wheel arch Rotten o/s mudflap hangar Rotten n/s mudflap hangar Leaking o/s swivel seal Rotten Alpine Window n/s Rotten Alpine Window o/s Hole in...

:5biagree:

I was reading about D2's having wider axles last night and wondered how hard it it would be to convert the cases to fit on a D1. Do the diffs line up and would that just make it a case of welding on the apropriate bracketry?? I know the rears have a watts linkage "wattever":D one of those is...

I hope its a wind up. If not there are still lots of mods to be documented so crack on. :p

Page 10? Really? We need an update

If they point out the offset of your wheels as being a possible cause then point out that they sell wheel spacers which achieve near enough the same offset as your cool looking deep dish steelies.