hose is 6mm OD

Also I had a relative send them direct from the states so it helped with the cost.

I fitted Arnott Gen2 Bags to the 2001 v8 p38 last year and didn't notice any real difference in handling from the original dunlops. But the reason for going for arnotts I had them on the disco 2 before the chassis snapped. My previous P38 97 Diesel I replaced the dunlops after buying the oil...

Had a couple of hours free today so replaced the cubby box and glove box dampers, then fitted new lpg filters and recalibrated the LPG system. I'm not going to jinx it and say the old V8 is running well.

The lpg system was fitted by a registered lpga company before I bought the rangy and yes the wiring was shocking but when the radio was on I checked the feed for pin 7 ignition feed and the voltage was zero until I turned the ignition on. But thank you for the advice

I did change the cylinder as well. :cool:

Hi, apart from lpg the rangy is completely original. Yesterday at work I made up a iso to phono adaptor going to try a kenwood cd player it has 4 pre outs. If all fails I will swap the complete bose system out of my A4 it will be stripped in the new year as I'm using the engine and loam for...

No, My original radio kept turning its self on and off with the ignition key out, also If I turned the volume down quickly the radio would turn off so I was thinking the on/off volume potentiometer was on its way out. So I treated the RR to a new radio same model number all seemed good for a...

Well the speakers have not popped since the other week but now the new radio has started turning its self on when the ignition is off. Are all p38's possessed or is it just mine.

My old radio used to turn its self on with the ignition off, I would go out to the Rangy in the morning to the radio playing music. So I thought I would treat myself to a ebay bargain same radio as my old one. It was fine when I first set up the new radio but today a load popping noise rom the...

Replaced the pump piston seal and fitted valve block and pump back into my p38, seal was in a sorry state.

Replaced EAS valve block o ring seals today and started to strip down pump.

Few jobs done today. Replaced spark plugs and HT leads, new bulbs in the Hevac inc dial bulb, clean out the blocked washer jets. depressurise EAS remove the compressor and valve block to replace the o rings and seal tomorrow.

Hi Martyk, Thank you for the offer of a replacement motor, I had a voucher so decided to go for a new one with price match got it for £90+ vat. So this morning swapped the old for new no funny noises now. Also replaced a few bulbs in the speedo (didn't disconnect the battery). I have opened up...

Hi Had a listen this morning and it's the drivers front lock noise and vibration. What I'm thinking get a replacement then strip down/repair my original one.

Hi Martyuk, Thank you for all the info, I think its one of the rear ones the noise is very loud and sounds like a dry bearing I am away for a few days when back I will have a better idea.

Hi All. Got a strange screatch when unlocking. But locking only the usual motor noise then clunk. Could it be a motor on the way out like I say it's only on unlock If any one has exprianced this please let me know. 2001 v8 4.0 HSE