burning and cutting them out what about putting the new ones in

will do, can the bushes be pressed out with a arbor press what sort of tonnage is needed to fetch them out

Your right got under it yesterday bushes are shot on the middle of the watts linkage mocking is coming from it when i rock the car can see the movment in it o well now i know what it is better get the spanners out

no Amigos mate, missis has had it until yesterday jumped in last night and had the noise spun and pulled all 4 wheels found drivers front loads of play in it like it happened all of a sudden, had it on a test drive out earlier once work had been done no more bumpy noise must of been the hub set...

ok its disco 2 v8 general family work horse all rounder

will have a check

looking for full set of tyres to fit 16 inch alloys , or a set of alloys with good tyres up too 18 inch

now sorted the last job and hear is the next, body wobble when reversing not as bad going forward only noticeable when pulling up might just be me, I don't get too drive her usually until the week end as I run around in a rock hard uncumfatable transit in the week on smooth motorways might be...

well lads got it sorted, craddocks in Cannock sorted me one out for £94 with the vat with 2 year warranty bit of huffing and puffing at first used chisel to get it off no damage the old one is a timkin's usa but knackered loads of play in it well chuffed thanks for all the advise, another job...

cheers bud thought as much just needed a second opinion before I get the wife purse out and knock of the cobwebs

missis came back from work I jumped in the disco pulled of and thought I had a flat by the sound it made worse when reversing, put gears and low range gears into natural rolled all wheels, found front drivers has loads of play when I push and pull top and bottom of wheel is this the bearings or...

mine are rotted through including the brace that comes down at an angle from the rear of the plate, I have seen replacement kits and flee bay they are galvanised and require pop riveting. Has anyone used these and are there any others available and how what are they like to fit cheers

as the ad says Leicester vinyl floor welder/ hot air gun had it a couple of years now new element fitted very good condition and working order looking around £140 same model as one in pic not actual one for sale

No worries hope they serve you well stay in touch :D

now sold to DiscoMark

replied

im going down to London colney on Thursday afternoon evening if any good

set of 4 alloys in great condition all with tyres 3 are rd legal one will need changing had them as my spare set but have never bothered using them 2 tyres are grabber at2 matched pair not allot of tread but still legal other is kumo which will need changing last is Dunlop with good tread...

will do

you star disco 2 as well bonus