1. B

    P38 EAS head scratcher - long post

    Well, I had a few volts coming down to pin 13 - but 13 V going in, so I started to have a look at the wires from the main harness to the plug that goes into the Driver pack - some dodgy wires there from others testing in the past and looks like the salt air has corroded the copper, so I would...
  2. B

    P38 EAS head scratcher - long post

    If I operate the pump from the ECU jumping pins 1 and 8 the pump works so I assume the circuit is working from the ECU as required I will have to go down town and find some tee fittings for the pipework and make up a pressure gauge - I am 100% the switch is working - but not the pressure -...
  3. B

    P38 EAS head scratcher - long post

    In my last post I said it was the rear left that went up but in fact it was the rear right SO I checked the valves to the wiring diagram from Hard Range and they are fine so next I put the original driver block in pump ran but nothing happened - the tank charged up but the pump kept running -...
  4. B

    P38 EAS head scratcher - long post

    You know I think this may be the answer! This morning we plugged it all back in and left it - pump running - door open and this time took off pipe 6 and air was gushing out of the valve block - so next thing we thought of was the pressure switch - not switching off under pressure - so checked...
  5. B

    P38 EAS head scratcher - long post

    Hi - yes pump is running fine and plenty of pressure - but when started it runs up fine then you can hear it straining - plenty of pressure coming out of the dryer- not going through valve block But again I will double check soon - will check the grounds and also if air is getting into the tank...
  6. B

    P38 EAS head scratcher - long post

    Thanks for the replies The Lynx is pretty capable and has worked fine on the EAS on other jobs There are no faults logged in the ECU There are no error messages on the dash and everything behaves as normal re lights on dash (the inflate light when pump is running, and the height selection...
  7. B

    P38 EAS head scratcher - long post

    Hi guys I was originally on the lr4x4 forum but was suggested to come here as there are a few more experienced owners I have a small LR repair shop in Canada and specialize in Defenders and Discos, and been in the biz 15 years here so soon as folk know I am a Land Rover man, they bring their...