Afternoon, All. I'd like to fit an observation hatch in the roof of my 90 whereby I can stand in the back. My mate suggested a sunroof, but I need to get my head and torso through it and be able to move around. What options are there? My 90 has the original headlining in place and I don't...

I had the same issue on my 90 when I fitted alloys and 235 section tyres. It was quickly and easily resolved by adjusting the lock stops. The turning circle is still good. Just remember the stop on the NS adjusts the wheel on the OF, and vice versa.

After all that, whoever fitted the side windows many moons ago didn't base their measurements on a County. Consequently, the trims will not fit. I've waited over a year to get hold of some. Hey, ho...

Thank you for that. It all looks a bit complicated! I was hoping it was just a few clips and fasteners....

Evening, All. I’ve finally managed to get hold of the grey plastic trim that goes around the side and rear windows for my 90. Inevitably, the clips and fasteners are missing. Does anyone know part numbers for these? The trims that sit around the small windows either side of the rear door...

Update: I ordered some more clips from a different supplier and they fit. They're the same part number. Go figure....

Above, you can see the problem. Here is a shot of the receiver on the door card:

Thanks for that. The white inserts are fine. It's strange that the two black fasteners I managed to save have a smaller diameter circular recess than the new ones, which just pull straight off the plastic buttons on the inside of the door card.

Not really. There's no way I could refit the door card without them dropping off and I don't think they'd hold the card in place.

Yes, they are.

Afternoon, All. I took my door card off to rectify a lock issue and, predictably, most of the black plastic fasteners broke. I ordered some more, but they don't work as the circular aperture has too great a diameter. The part number was MXC1800. When I compared them to the old clips, I could...

I used a socket with various extensions so that I could find a point where I could turn the ratchet handle. Once the bolt is broken off, a normal spanner works.

No problem.

Great. Please let me know courier details when you have them.

Sure, no problem.

I have a five set of these in good condition with all the wheelnuts, including the locking wheelnuts and key. They are boxed. I am getting rid of them because I put freestyles on and don't need them anymore. They're too good to take to the tip! The photo is from Google as the wheels are...

Morning. Here's a link to the part in the website. Postage was £1.50. https://www.firstfour.co.uk/catalogsearch/result/?q=mwc9380

Ok, I found a website with sensible postage, so have ordered a few. Thanks again for your help.

Many thanks. That's the one. It's about £1, but then £5 postage on top!!!

Evening, All. I'm after the part number for the small clip that is found screwed to the inner wheel arch behind the coolant expansion tank. It's the one that holds the bonnet release cable. Many thanks, Dom