Not sure as ive done nothing but spotted it.

Nice one

Cheers ratty ill have a go at that and let ya know how i get on :)

Do ya think nipping this up will stop the leak or does it need a new seal? What would the part be called if i need to order one?

Well the pad is on the disc but not rubbing so i wouldnt say its fully out

They are seized out

Ive discovered two pistons on the one side of my calliper are ceased, whats the best way to fix this?

Thanks guys, im gona try get around to lining my door up this weekend :) its starting to drive me mad not shutting properly lol

Land Rover 60 years of Adventure' by Nick Dimbleby?

What size bit do i need for the front door hinges?

I tend not to do things cave man style lol

Thats just what i need, cheers, i wasnt getting anything like that with my searches lol

What i mean is i tightened the hub nut up with the box spanner in my hand then i put the screw drive through it and give it a turn. Was you picturing me with hammer and screwdriver on the nut banging away?

I see where i went wrong,... I only did the first nut up hand tight then a little tighter with screwdriver. Ill try tightening them some more like you say and they should be ok then :) Cheers lads

Does anybody have a picture of a defender, just the outlines on a plain white background? Does that make sense? I want to try out different colour schemes on the pc with paint or something.

Only just seen this post ill give that a go tomorrow. Ive just changed the wheel bearings on the opposite side as there was loads of movement and now its all back together there is very slight movement. Does that mean i didnt tighten the nut enough before putting the locking nut on? (No torque...

Ok so there is movement but i think its just the wheel bearing as i can see/feel the brake disc moving?

If there is movement how will i know if its not the wheel bearings causing movement? Ill go and check now

How the hell are they still in business if their pulling stunts like this? I wont be using them again, lesson learned :rolleyes:

Ok so i wont put anything else in it. I didnt adjust anything or measure any preload???, i undid the 7 bolts holding it onto the axle, removed the lot with the half shaft and swapped the seal over then put it back on (not a fun job lol) And yes its Britpart.... Ya think thats the problem?