suena como la bomba de inyección está ligeramente. Retire la tapa IP (sólo la placa de poco), a su vez sobre el motor a mano hasta llegar a las marcas de distribución en la manivela. Obtener un taladro de 9,5 mm y ver si se puede caer en la bomba de inyección timming agujero (esto debería...

Get yourself the fittings for the axles then go see these guys for the pipeing ( should be able to sell you a few mtrs ) The HGV Centre , Grab some cable ties as well . It'll be cheaper :D

I change up to 5th @ 40 then use all the torque from there and thats not using a wide throttle or laboring the motor . She will do 70 but the trannys not brill in mine so i keep her at 50 - 60 ( disco 200 , standard trans 19j - on 85 sahara's ) .

Yep Im with Storm on this . box or engine out time ( order a new clutch fork before hand )

Ask Catofthewoods about that :) ( I see your on the page mate lol :) ) . that'll defo be your plug into far , then kicked it out . If you where closer I could prob get you a cover and plug . anyone on site close by thatr could lend u one till you get one ?? .

Watching Paul fire up the landy and and gob out a load of oil from his cooler pipes . PRICELESS :D Wish I had video :D

Get the jack out Paul , and tighten your wheel bearings up :) .

Give it more than 10 secs heat , its only just started to get warm at that - used to give mine a good 20 - 30 on 4 new plugs to get the bitch started on cold mornings .

Its prob a snorkle support bracket :D , but theres nothing else there so bed it out the way :)

Yo gezza

try NTC2660 - Craddocks want £61.78 for one !!!!! sod that Measure the diameters you need and try these guys Auto Performance Silicone Hoses go here for a parts manual - http://www.landroverweb.com/Pdf-files/Manuals/Defender_Parts_Catalogue.pdf And save it ( top of the page - next to...

Sorry to say but its box out or tbh , its easyer to take the motor out .

How long have they been on the car ? , looks like perrishing to me .

Well as you got the lockers , all you'll have to do is run power to the locker and have a seperate tank in he same locker ( if theres enough room ) . When I fitted mine I just used a metal 5ltr can ( Thinners tin ) and solderd a length of brake pipe into it for a fuel pick up . Works a treat +...

normally bolted up through the wing tops ( if he dont want them can I have first dibs :) )

The head doesnt fitt + too many little differences , so the 200 blocks going in insted . Heres a pic " bed time story "

are we talking about front cover and belt still on ??? or all off ?? With covers on ---u need the tool to hold it all into place with the belt still on . cover and belt off - then like above , 3 bolts off the pulley - not the middle one . :)

Paul adapts the right PPE for the job at hand still bangs his head tho :D

or somone has weldeed replacement mounts on wrong !!!! Get the tape messure out time

Big end caps dropping on your head = pain Eating on the job - food for thought Other half bringing it all out for you - priceless :) :D