sorry its 1999 4.6 hse auto.

Hi all, Just a quick one I went out with wife today in p38. It started juddering and shaking at 50mph but once she had warmed up it settled down. It was still there but only slightly, I think it could be the viscous coupling am I on the right track or not? Any thoughts would be great...

Hi Guys, Sorry haven't been on for a while... Just wondering what Tyre pressures you guys run on? My Rangie hasn't moved for a while so need to check pressures. They are 255/55/r19s on goodyear wranglers. Any thoughts would be appreciated. :)

I used a 36mm - you might need two but I got away with one :)

Hi Guys, My car will not make the alarm beeps on the second lock, it will only make the two beeps when a door is ajar. It used to beep on the second press of the button when I first bought the car but just recently it has stopped. What do you think is causing this? Thank you in...

Thanks Saint v8 that's the one I'm looking for :)

Petrol V8 Thor engine - sorry didnt write this before =)

Hi guys, Hope you're all well, have'nt been on for a long time been busy working. Just a quick one, I need to replace the heater to thermostat hose but can't find one on ebay or p38 spares. Just wondered if anyone had a spare one knocking around - willing to pay. Quick rant - My insurance...

Had the tracking re done after I replaced track rod ends and the front radius bushes about 4 weeks ago... Thanks for your help :)

Hi Guys, When driving my p38 today I got to about 50mph and the steering wheel wobbled quite violently. It doesn't do it before 50mph and if you accelerate out of the wobble it stops. I noticed it was worse when the car was cold... It has recently had new front radius arm bushes, steering...

I would say it is the accumulator i have just done mine.

I had the same problem I did all sorts. I changed radius arm bushes. new steering damper and a re-con steering box it drives sweet now :D

no the ABS is not on :D

Hi all Think i am going to have to change my ABS accumulator. The pump comes on after every time I brake. The brake pedal went spongy after braking down a steep hill. The brake pedal went close to the floor.I think it is the original accumulator on her. It's a '99. It seems fine now after...

The liners can slip as the original ones are not flanged. Its **** liners they use in the factory...

Hi, I had slipped liners on my p38 last year. It will progressively get worse overtime. My range rover did not over heat all the time even with the liners slipped. I drove it around with the liners slipped for two months with no over heating problems. Then it got really bad and overheated on...

Thanks for that my father in law said that is there some where i can get them pressed out and in. thanks

Hi all, Which are the best bushes to use on the front radius arms? Mine still has the original ones on. She's a 1999 HSE. I have looked at the polybush kits on p38 spares for 179.95 or do I put the original OEM ones back on? It is my understanding that the polybush ones don't need to be...

I have a 1999 p38 i have play in my steering i don't no if it normal it has been like this since i have had it. just wondering if it could be the steering box i have adjusted it no change all joints are fine any help would grate :confused:

Thanks very much for that, it was really helpful. They were the ones I needed and have now ordered some.