Hi i had same prob i think you have punched a hole in your clutch release fork it will need replacing im afraid

ask the seller when it had its cam belt changed, cos if it snaps it can be quite an expensive bill

tyre pressures?

Hi if its pulling to the left then your front right caliper pistons could be siezed check them first

hi i have pirelli scorpion strs 255 65 16 on my 300tdi commercial they fit no probs

hi i used veg oil for about 9 months in conjucton with a veg oil conversion my 300tdi ended up with gummed up piston rings and had to get the injection pump recond cost was about a grand a really good saving, be carefull.

Dont think of scrapping it, most of that will buff out.

Hi take a look at the EBC web site, the green stuff pads are better quality than OE and slightly cheaper.

the manual says 0.0 to 16 minutes toe out

Hi, thanks for the info much appreciated. cheers

Hi, does a disco need to have its tracking checked at a specialist ie main steelers cheers.

Hi, i am going to split my front brake calipers. Does anybody know the part no of the seals that fit between the 2 caliper halves,also where can i get them cheers.

thanks for all your help. Any more info would be appreciated cheers

hi I have just received 8 stainless pistons part no 606683s and 2 sets of caliper seals part no aeu 1547g the problem is the fluid seal and wiper seal seem to be to large. Is there another seal kit that i should use. the disco is a 97 300 tdi commercial. cheers.

duralac was used on spitfires and lancs etc the modern interfaying paste is called jc5a it does not go hard

hi 225 for 12 months motoring cheap

hi chaps, how do i re-set my key fob so i can get into my disco. cheers,elt

It was originally developed for the audi le mans sports cars

Thanks for the quick replies lads, I forgot to tell you i changed the slave two months ago, Seeing as they work together i now realise i should have changed the master at the same time, cheers.

Hi gang, ive got to change my clutch master cylinder. have looked in the haynes manual and it seems a fairly straight fwd job. My question is are there any pitfalls. cheers