the +2" shocks will give you better articulation, so you can leave them on but you may need extended bump stops and dislocation cones. same as putting -2" shock mounts on. What type of roof you after I have a full hard top roof spare in bristol . I also have a big pile of springs from discos...

don't rule out a disco, on your budget you could get a kitted out good condition disco, and have change. 2k is not a big budget for a 90 (standard 1992), and you get even less for your money for a 110, and if you what more than 3 seats in the 110 you will struggle for anything after 1990. You...

easy job..... http://www.landyzone.co.uk/lz/f41/uj-renewal-59812.html Did you grease the prop's, it maybe just need grease.

you could just put a stand / block under the axle, you axle will cope with that just think about what else they go through. I use a trolley or bottle jack to do nearly everything on my landrovers, I find my high lift is far to unstable and hard work.

if you find out it work, you then have the fun of finding out why the light doesn't work. Id rather be sorting problems out with spanner than soldering iron!

for play days, most aggressive tires you can fine so no one can follow you

my light stopped working last week, not sure if its do do with the cold or a electrical fault. But to cheek for sure if its in try jacking up one wheel and driving off the jack. when diff lock is in it will, pull away. And my leaver is very easy to slide across, as its should be.

when i was looking for my 90, i looked at the idea of using a ****ed old 90 as a v5 and donor, then building it on a galv chassis with a disco 300 tdi and running gear with all new suspension. Could always build with a td5? Cost wise it was out of my bugget but not so crazy that its not worth...

The devon one is built by them, and properly a similar design to the cross member they do with a winch mount. I have just spent out on one of there winch bumpers and if its half as good as that its brilliant. if you what just a cheep one try paddock or the like, think most of them stock ****part...

when i looked in to it this is as cheep as i could fined new, ebay was pussing the same money... HOOPS90 90in Galvanised Hoop Set for full canvas

why not take a photo and post it? people could soon tell you. if you have standard tyres on it the a lift will look strangly massive

Richards Galv Chassis

I would agree with you but, if he has already had it running the any thing that is going to bend will be. "still runs but it kicks out clouds of smoke, has little power and the turbo doesnt seem to be doing its job, makes a kind of "put-put" noise" Sound a lot like a lack of air caused by a...

befor you get to woried about hydraulic lock and the like you may be fine. iv seen many cars/land rover and even my bus last week get a bit of water in cut out and be fine a few min/hrs later once they have dryed out a little. ( mainly cos i drive like a dick when i see a puddle!) id start buy...

sounds like you need Defender Water Ingress Manual try here for it...» Land Rover Manuals Land Rover One Ten: Articles, Manuals, VIN Checker, Guides and Tips on the Land Rover Ninety, One Ten & Defender 90 & 110

I have the same problem, I fiber glassed the inside of the head lining and made sure the water runs out the holes in the floor. hay presto water gets in still but nothing is getting recked!

buy a hole 300 disco and sell/scrap the rest, £50 for body chassis of a disco for scrap.

LA930456 on have the wider arms. and watch out for abs disco axles when buying, there not a problem but if you ever need to replace bits it may cost more

yes disco axle will be fine, depending on the year of the 90. If toy are pre 200 tid ( i think) you will need the radios arms too as disco ones are wider. also may be worth cutting off the anti roll bar mounts if it has them

I am doing that this week, but have opted to keep original axle case and build the later swivels with on with all new gadgets and seals. its all nuts and bolts so is easy stuff really, if your going to fit new springs shocks and bushes id change the whole thing. i would leave a weekend for it...