Hi So i took my landy out for its first test drive since rebuilding it and the handbrake is sticking and it will only drive in low range. Initially I thought after a few miles driving it will sort the problem out but there has been no joy. The handbrake worked fine before I began the rebuild...

Do you reckon you could also enlighten me to which brake pads I'll need as well? Thanks

Great thank you James!

Outside diameter is ~46mm Inside diameter is ~39mm

Hi, I need to replace the pistons and seals in my front calipers as the existing pistons were seized. I am not sure what kit I need since they're not the original calipers. From what I can work out, it says: Lockheed LR10TY017AC (LR could be L8 or LB) 3274-684C 108-3L (could be...

Found the they (I) had cable tied them to the main loom hiding their ends and colour...

Can someone help me, I have no idea where the green and green+purple wire comes from for the brake light switch. I trace the G+P wire up from the rear brake lights and the wire goes into the mass of wires near the fuse box but then i lose it. So please could someone, who knows, explain...

I am after two standard steel modular wheels as i cut into the rear two when getting impatient removing seized wheel nuts from my rear axle that looks to have been sat in salty water most of its life. I will be prepping and painting them so don't worry about beauty. I'll also probably put new...

message sent

Sorry but your a few hundred miles too far:( Thanks anyway

Exactly what I am doing now, a few meters of 2 x 1 and some plastic sheet bought off ebay for £25, flies and dust proof. You wouldn't even need to buy any plastic, just use some white bale wrap and put a light inside?

Anyone?

I am after the windscreen glass since I broke mine removing it :D. I am in Bridport, Dorset however will be going up to Princess Risborough on Thursday and will be returning on Sunday. So could collect from m3 area. Cheers

Thanks for that, I'll go down to the shop with those dimensions and hopefully come back with the right ones this time! All the UJ's are good, one just was a bit seized so I took a circlip out, bashed it about abit and greased it up and now it works great, just broke the circlip in the...

Right, before you say "go measure the others", I have removed one but it broke and all the others are pretty well stuck in the holes so I am pretty certain I'll break the others if I try to remove them. Does anyone know the size of the circlip i need for the rear UJ of a Land rover 90? I've...

Cheers Pete, I have connected everything that you said up, and used the cigarette lighter wires; ideal as there was a wire for a light, wire for earth, wire for fused live, so i just had to get the ignition live from somewhere. Now just waiting on getting my stereo and adapter loom from my mate...

Ideal thank you for that. Cheers for the replies guys, much appreciated.

Cheers for that. I have just been doing as you say and the only wire i can find that seems to be influenced by ignition is one of the white ones and it is live if the ignition is on and it creates a circuit with the positve battery terminal but if ignition is off it create a circuit with the...

Hi, I am getting rid of the ancient tape cassette radio and putting in a new one. I have attacked my Peugeot 106 and removed the stereo wires from it and plan on transplanting them into the landy. From the peugeot's wires, i need a Permanent live, earth, ignition live, illumination and i...

I used them purely out of convenience, I was driving past and figured they'd do. They are still getting a letter!