had my wheels powder coated and tyres turned over so writing is on inner wall

If you are getting a wet right shoulder, run some sikaflex or paint in the external roof gutters - they tend to crack over time letting water in.

+1

cheers guys :)

second James on the half shaft. or a shot drive flange on rear axle perhaps?

selection of series based prezzies for my 35th Life events: shortbreads: wrapping paper:

http://www.landyzone.co.uk/lz/f6/front-crank-seal-timing-chain-pics-253602.html

cheers cabbie-I needed to know which bolts required counting 😉 now I'm in the know :)

cheers lads.. I tend to get more sense out of the series boys than the fender-hence my apology for posting in this section :)

guys sorry but my 300tdi defender 1995 needs a new drop arm and ball joint. can you help me determine which I have? 4 or 6 bolt?

they only sent you one bar? that's not on!! with a small amount of bending you can make the bar fit to the back face of the slider to the rear face of the outrigger if that makes sense? that will save you taking tank out. to be honest the 6 bolts on my tank came out nicely which is why I...

jack under bulkhead and knock bolt with hammer.. what measuring are you doing-didn't need to with mine

£115 delivered chaps they come galvanised with all the brackets and bolts. I etch primed mine then painted same colour as body Sillbars with plain box section :: Land Rover Accessories from Mill Services

you're welcome mate:

all finished:

if you are not replacing the bolt just take nut off and slide sill bracket over and put nut back on. If you are replacing bolt then undo nut so it sits flush with end of bolt and whack seven bells out of it - it just pushes out (no screwing). Trouble is the bolt wastes down through the...

thanks Geoff-I'm pretty chuffed with them

just put a set of mill-services ones on mine http://www.landyzone.co.uk/lz/f6/mill-services-sill-bars-265770.html

rear fitting-deffo a tank out job so had to buy two jerry cans to drain fuel!