Anyone made the fuel warning light work? I only have 2 wires at sender, where would the third wire go from the sender to make light work?

Ok cheers James, what about from injection pump back to tank?

What is the max amount of pressure the fuel lines from tank to injection pump run at?

yes did the valves. I am thinking injectors as they have been used in two heads that have both overheated and cracked. Are they prone to failure after a head has overheated? Started the engine this morning from cold with glows unplugged, it started but not very well.

I know there are loads of threads on this but here is my problem. Cylinder head was cracked due to overheating leaking gaskets bad radiator etc. from previous owner. I have replaced head gasket, new cylinder head, p-gasket, water pump and gasket, radiator and thermostat. I have also...

Cheers James

Even if there is a slight difference between my old head valve stand down and the new head, as long as it is within the stated Landrover specs I should be ok to go by my piston protrusion? Do you mean there is no point in changing from the original Elring head gasket to these multi leafs as...

Ok so what your saying is I could use an Elring gasket with the newer head. They supply you with the thickest head gasket to allow no room for error. Both agreed on radiator problems and leaks. The newer head is same price as older head so I might use newer head with older Elring gasket as...

How come the description of this cylinder head LDF500180COM states you have to use LVB500220 - 3 hole head gasket. I thought the correct sized gasket was set by knowing your highest piston protrusion. Thinking of buying this head but am a little worried of the horror stories I hear of using...

Is there any difference in power output from a standard Defender 300tdi engine with Bosch Fuel Pump and a standard Discovery 300tdi Bosch Fuel Pump. Im talking pumps at standard factory settings for the minute. Been doing some research and from what I have read if you have a standard 300tdi...

" rad or coolant shortage due to p gasket etc " this was my problem so have replaced rad water pump and gasket etc. Just got to choose myself a new cylinder head

Island 4x4 want £249.99 exc vat with valve and springs dont know whether this has extra cooling waterways Devon 4x4 want £420 inc vat but comes with extra cooling waterways with valves and springs

Need a new cylinder head for a 300tdi defender. Has anyone used a Britpart head with success or you reckon it might end in tears? I have read they have additional waterways for improved cooling.

Ive not got any fitted to my 110 but am thinking if I did they would help reduce the water/salt and mud etc from spraying the rear cross member and foot wells.

Ok sounds pretty simple. Might keep looking for a while though and see if I can find an 80 amp that would drop sraight in.

Ok ive not done that before so if I undo the alternator housing bolts and twist the casing round is it not possible to damage wires etc inside ?

Anyone tried using this alternator in a Defender 200tdi? My standard 65 amp has just failed. Used a 100 amp from Frogs Island a few years ago and had major problems shredding v-belts but STC1753 is 80 amp. Im wondering if it will be a straight fit.

Is there any noticable difference? I would have thought the softop would be slightly better being lighter weight.

Wanna change the colour of my 110 canvas from green to black. Anyone tried this?

I think it has probably been set up wrong too so I shall get stuck in now I know how its supposed to work. Cheers!