So, is this the part I want; Part Details Does it cover everything on the vehicle, (lighting?, heater?) Seems better just to buy the cable and make on to me! Just priced up buying all the bits and should be about £50

HI, Thanks, anybody know where I can get the standard loom?

****, Not a gd idea then :( Has just been completely rewired with the trailer stuff for all the low current stuff (sensors+sidelights etc) then heavier stuff for others. No colour coding as you say, so a pig to find anything (I always have a meter handy :)) Do I have to rip it all out and...

Having been dreading taking out all my dash wiring to remove my bulkhead for easier repair (than doing it in situe) Think ive just have an excellant idea for the hundreds of wires that would otherwise have to be painstackingly labled and removed, only to have to be individually reconnected...

Well, I Guess its not much of a problem for you guy's! Situation is, I dont really have a garage, other than to store tools in. Ive got all the "mechanical tools" (inc compressor and air tools, but NO welder, or much welding skill) My series landy have rotten footwells (both sides need...

Hi, Have read that you need minimum of 130 amps to weld Land Rovers. This seems high to me, it would be fine if you want to weld the chassis. But i just want to weld in some new footwells, so im thinking even 100amps would be enough, as the bulkhead is a lot thinner. Do you think ill be ok...

Its a Landy its designed to be cold isnt it? Since when has a heater worked better than being coffed on? Uprated heater matrix is a great idea if there is one though.

Hi, Anybody have any idea how much it would cost to have both series 3 footwells replaced, by a Landy Restoration place. I know having somebody else do the work defeats the object of owning a LR, but, just seems after buying all the gear, and stripping down, id rather just pay somebody to do a...

Hi, Thanks for all the help, will have a look on the car when I get home. Mines a 1973 if that helps. Should the light just be wired in a circuit with 12v+ then to the light, then to ground/earth? Thanks again

Just coming to the end of wiring my dashboard. Anybody know where the cold start thermostat is? Ive found the engine temp sensor on the front of the block, and the oil pressure sensor on the oil filter, but where the hell is the thermostat that the cold start light connects to? Or am I...

Hi, Thanks for all your help! Guess thats another thing to sort out then. Mine was driven at 20 with the hand brake on, and think its knackerd the brake shoes? Should it roll at all with the hbrake on (like 3 foot!!) guess not! Guess thats another thing to add to my paddocks shopping list...

was worried about my handbrake, rolling 3 foot either side of the hbrake, as how would i tell the examiner that "its normal for it to roll like that" But somebody told me that as its a transmission break (aka, it locks the drive train instead of applying the wheel drum brakes) its UNTESTABLE...

Bit of a slow reply to the topic but; Think that gromets are the thingys that cover holes, and allow cables to go through things neatly etc. And Gaiters are the thingy's that go round the levers, and shafts, to make it look neat and stop crap getting in. Well thats what i think!

Just checked my magical land rover bits CD Rom, Part No. 303817 Part Details Hope this helps, biosbill

ill post when ive checked the part number this evening (6pm)

Seems to be many of the most common on here!

ok, thanks for the help! do u think it ncessary to take the dash out, to cut out/weld in footwells? I really don't want to tackle the dreaded dash wiring! thanks

Hi, My series 3, looks great outside and underneath, but both the footwells are starting to look a bit iffy, you cant see through them as they're plated, but the splash guard has come loose, and they look a bit tatty from underneath. So over the winter planning to strip out the buldhead, brush...

On No!! If you change the hinges as above, pls post about how it went, im a bit worried about having to hack a hole in my bulkhead if the nuts drop out! Although, (ill post pictures later) ive managed to make up a metal plate, to adapt the Series brackets to take Defender mirrors, its a bit...

Ive got a Series 3, coming up for its MOT in Nov, just want to ask a few questions; Everything that i can think of to pass it is done apart from the thingy's that tell you that indicators are on (you get a clicking noise, but no lights) Will it fail on this? I guess it doesnt need hazards for...