I've had a gender on the net, but no-one seems to have the info. Even the sites that are selling them, it doesn't say.

Got 2" lift on, have asked if they have adjusted anymore of the suspension, full polybush replacement, so would save me a job. Think I better go have a looksie first before I commit, however it's a Disco and really want it, seem to have bought it in my head first.. Silly me:D Does look in good...

Haven't got a scooby, not sure the info is going to be on the Rave. Stick a piece of string around it and measure it that way.

less then £700 as they dont need it anymore, H Reg.

If it's the A-Frame that connects to the rear axle, I can find the ball joints for variuos years, but not the frame. Might be help if you had the part number, send a message to the guys on ebay that are breaking one, they maybe able to whip one off for you.

Boys 'N' Gurls After another Disco need to budget, found one which is not too far away, 230K on the clock, recent cylinder head change, welding in usual places. have asked them about the sills, boot needs a little work but not near the seat belts areas(bonus), they say pulls like a train...

I'll have to have a gander, check out whats what

wish i could but the ins comy took her already. will have to be Ebay/Trader route now.

Not this one then :D

Been all over Stealbay, Autotrader. nothing got my eye just yet, even they are all good looking at the mo lol, No airbags but at least I know my seat belts work!! smacked my knee on the colum though, nice little bruise. Worst bit was when the coppers tried to push her out the way with a samori...

Sure there is also a relay for the 200, in the passenger foot well bank of 3 i think. if you turn the lights on/off is there any clicking?

Give your stark a wiggle see if anything happens, could be dodgy wire which has broken free and needs soldering back again, also give the connectors to the headlights a wiggle they are prone to go.

Cheers Guys Just replaced the sills, and bloody front prop. always happens to me.:rolleyes:

I was coming back from work when her side had slowed right down due to a tractor, she couldnt be arsed to wait, and didnt look on my side, I ended up doing a 180 luckly I didnt hit anyone on the otherside. She ended up going down a ditch. Ended up being me who dragged her sorry arse out the...

Just thought I would show the aftermath when this lovely young lady pulled out in front of me when I was doing 50mph. Um did I have time to stop, did I bollocks!!!

If fuse is ok, I would check that you have power to it. Should be live all the time on a Brown/Purple wire from fuse MF3 in the engine bay fusebox (60A)

Yes your right allways at night when you need it!!! First I would check battery voltage, give the terminals a clean. as for the lights I would trace from the start, Battery,Fuse,Switch,Relays Give that try see where you get. Stu

Had the same on mine, tension on the pre swivel was off.

Use P-Clips they have rubber inner so won't rub then you'll drill and screw to the frame. Something along these lines. http://www.sjscycles.co.uk/p-clip-rubber-coated-black-per-pair-prod5058/

This happened to me, was driving then the pedal wouldn't come back up, had to use my foot to bring the clutch back up, then after about 4 changes went solid, no matter what i tried was rock hard. the pivet had worked it's way through the fork. had to split the box and replaced with heavy duty fork.